Re:To the future occupants of my office at the MIT Media Lab
by Animats on Sunday August 16, 2020 @03:29PM
(#24180479)
Now, here's a good project for someone into mechatronics. There are many videos of machines for making N95 masks on Youtube. Watch them, and try to design a better one. Things to note:
- They're all running at a rather leisurely pace, about 1 mask per second. That's very slow for a simple low-cost product. Compare textile machinery, progressive stamping presses, bottle making machines, and printing equipment. That's probably because demand for these things wasn't high until recently, and nobody designed a high-speed machine.
- The bottleneck seems to be attaching the elastic loops. The rest of the process is all roll to roll and could easily be 3x as fast. Is there some better way to do that?
- Can you get wider rolls of the source materials and build machines that make more masks at a time?
- At the output end, most machines just dump the finished masks into a bin. That loses order and count.
They then need a separate packaging operation. They come out of the machine in a consistent position and orientation, which can be exploited. A better machine would put 10 or 20 masks put into a printed poly bag and heat-seal the bag. Then it would drop the bag into a waiting cardboard carton. When the carton is full, switch to a new carton. The filled carton gets a shipping label and rolls down a roller conveyor headed for shipping.
Compare [1], an N95 mask making machine, and [2], a paper cup making machine. The paper cup machine is doing a tougher job at 5x the speed. It has a flying paster, like a big printing press, so you can change rolls without a shutdown. The cups are shot out through a pneumatic tube to the cup stacking and packaging machine. That's why paper cups are so cheap.
- They're all running at a rather leisurely pace, about 1 mask per second. That's very slow for a simple low-cost product. Compare textile machinery, progressive stamping presses, bottle making machines, and printing equipment. That's probably because demand for these things wasn't high until recently, and nobody designed a high-speed machine.
- The bottleneck seems to be attaching the elastic loops. The rest of the process is all roll to roll and could easily be 3x as fast. Is there some better way to do that?
- Can you get wider rolls of the source materials and build machines that make more masks at a time?
- At the output end, most machines just dump the finished masks into a bin. That loses order and count. They then need a separate packaging operation. They come out of the machine in a consistent position and orientation, which can be exploited. A better machine would put 10 or 20 masks put into a printed poly bag and heat-seal the bag. Then it would drop the bag into a waiting cardboard carton. When the carton is full, switch to a new carton. The filled carton gets a shipping label and rolls down a roller conveyor headed for shipping.
Compare [1], an N95 mask making machine, and [2], a paper cup making machine. The paper cup machine is doing a tougher job at 5x the speed. It has a flying paster, like a big printing press, so you can change rolls without a shutdown. The cups are shot out through a pneumatic tube to the cup stacking and packaging machine. That's why paper cups are so cheap.
[1] https://youtu.be/SdCBKB4DhdA
[2] https://youtu.be/x3Vx5y0Yg3Q