After all the changes, it's at the end, and uses the weaseling "may be needed" and "can be used". We saw that not doing very specific sequence in a few seconds makes the plane non steerable.
Edit: Answering: "The LA pilots worked the problem for 5 minutes, the EA 2 minutes. Quite a bit more than seconds." They "worked the problem" during that time by actively attempting to prevent the plane to crash. It's surely not that they simply had that much time to think about what to do next. Also, during most of that time of "minutes", if I remember correctly, the plane was most of the time actively turning to the ground, overriding their attempts to force it flying in the safe direction and doing that repeatedly. I really don't see that for these two accidents it can be said that it was "a pilot error" and I don't see any institution claiming that publicly anymore, even if some would really, really like to be able to do that and would immediately do, if it were possible. "Two simple steps"? Well "may be needed" and "can be used" is surely not even "after X happens do P and then do Q, if not exactly done in that sequence and at that point, the plane will surely crash." Nobody had the training to fight against the program that every time they straightened the plane up turned it back to the ground, making the manual trim impossible to be applied.
Frankly, I'm baffled by the EA pilots. If I was a MAX pilot, and I received an EMERGENCY AIRWORTHINESS DIRECTIVE about how to not crash like LA pilots, it's my job to read, understand, and remember those instructions. And not just my job, it'd save my own life, too. It's not like it's complicated, either. Two simple steps.
After all, what would you do?
But yeah, it was the pilots not reading a message.
Looking back, MCAS was not a good idea. But whatever led up to MCAS might have given the 737 MAX also some other bad changes. At the moment we don't know, maybe in future it'll be "obviously aside from MCAS the 737 MAX should also have a fix for X".
It was that the message (see the whole, the link was quoted) definitely wasn't clear. It has multiple weasel words and it is far from a clear and actionable sequence checklist for the exact condition in which two planes were put due to the MCAS. Only with the hindsight of knowing how two accidents developed and the independent pilots trying to reconstruct on the simulators these events it can be claimed that that formulation described something usable. Just with the pilots "reading it" at that time and even having it in front of them at the moment of the accident, without any special training for that situation (where the plane multiple times "undoes" the actions of the pilot, orienting the plane toward ground as the plane is still flying low) it's still improbable that the accident wouldn't happen.
Note: It's Boeing who insisted that the training for MCAS is not needed.
> It's Boeing who insisted that the training for MCAS is not needed.
It's not completely unreasonable to expect the pilots to be able to handle runaway trim, especially given an EMERGENCY AIRWORTHINESS DIRECTIVE reiterating how to do it. Runaway trim is a critical problem, which is why the electric trim switches are there as well as the cutoff switches, all in easy reach. Dealing with this is supposed to be a "memory item", meaning something the pilots must know.
But clearly in hindsight, dealing with runaway trim must be specifically and better trained for.
> special training
The thing about runaway trim is it turns on when it's not supposed to. That's why the electric trim overrides are there and the cutoff switches. Those are there for all Boeing jets since electric trim was installed going back to at least 1960 and probably much earlier.
When I worked on the stabilizer trim system on the 757, I worked mostly on the gearbox, but was peripherally involved with the electrical system for it. The cutoff switches were there for "when demons possess the control system and try to drive you into the ground."
For the second crash it wasn't about "hit the switch" at any moment you will when you notice the problem. It was: "unless you are lucky to hit the switch in a very special moment, you won't be able to regain the control of the plane at all." Not in the message, not trained, and even some pilots learned that only later in the reconstruction of the crash on the simulator.
There is nothing confusing about that. There is no "very special moment". There is no "you won't be able to regain control at all".
The proof of what I say is in the first LA incident (the one that didn't crash). The pilots trimmed back to normal a couple times with the electric trim switches, then hit the cutoff switches, and landed safely without incident.
In the second LA incident, they trimmed back to normal 25 times, never thought to cut off the trim system, and crashed on the 26th time.
I don't see that wording anywhere in EAD. Only the quoted weasel worded sentence. It's your interpretation post-crashes and their analysis that they were supposed to do exactly that in exactly that order. Or do you have some other quote? The mental model the pilots were trained to was "if the electric doesn't work, switch it off, trim manually." The MCAS changed that to: 1) electric will work, but MCAS "invisible ghost" will pause to confuse you that the controls work and only then undo whatever you managed to do. 2) There's only one position in which turning off the switch was safe, under their circumstances -- switching to manual trim outside of the "normal" was a practical death sentence, also nowhere written.
So, as far as I see, not only your "clear" sequence was nowhere written that clear, the mental model that the pilots had to have changed completely, but without training, and the safe procedure to escape was figured out only after looking at the logs of two crashes.
That it is "clear" to somebody sitting in the armchair with the crash logs and having all the time in the world to think about it after all that happened doesn't mean that those who survived had such clearness, just that they had luck.
P.S. your version of what the words mean is solely your invention. I've shown this text to many people, and none have come close to your creative version. This includes pilots.
You're entirely correct.
> Blaming pilots is way too simplistic.
Also correct, but in my opinion the pilots were one of the multiple causes of the accidents, based on the published accounts of their actions. Ignoring Emergency Airworthiness Directives is inexcusable. Ignoring EADs is a problem that should be dealt with as part of the corrective actions required by the FAA.
Recall that immediately prior to the LA crash, the previous flight crew on the same airplane had the same problem, dealt with it, and landed safely. (That was also before the EAD was issued.)
Let me put it another way - would you want to get on an airplane with a crew that didn't pay attention to Emergency Airworthiness Directives? I wouldn't.
And yes, Boeing must fix the MCAS system. I'm not excusing Boeing's role in the accidents.
https://www.youtube.com/watch?v=a5P8CkVckmA
These are some links to youtube sims of the two events. It seems that the Lion Air pilot at least who of course did not know about the top secret MCAS system was trying to fight MCAS directly with electric trim and at first was successful but for some reason did not hit the cutout switches after getting back to level flight. So the Lion Air pilot used electric trim correctly but failed to use the cutoff switches and the Ethiopian pilot used the cutoff switches correctly but failed to use the electric trim long enough. Maybe the Ethiopian pilots were aware of the Lion Air flight fighting MCAS with electric trim and losing and just went directly to the runaway trim stab procedure too soon. For whatever reason both flights were also going too fast and made no attempt to slow airspeed.
The LA flight prior to the LA crash flight did restore trim with the electric switches and then cut it off, and landed safely.
That article I think summarizes the state of the pilot error arguments back when people were still discussing this online. Two methods of disabling an out of control MCAS were mentioned but only one would actually work with a faulty AoA sensor: lowering the flaps. I wonder why Boeing did not mention just lowering the flaps to disable MCAS in an emergency situation. Could that also have saved the flights?
This is actually the first I've heard anyone mention the simple method of using the electric trim to fight MCAS until reaching a neutral trim and only then hitting CUTOFF, but would this still work if you were already at max trim and heading nose down toward the water? This method seems to depend on the electric trim being fast enough to fight MCAS to a neutral or near neutral trim even from a maxed trim stab position. Is it fast enough to do that?
https://www.reuters.com/article/us-ethiopia-airplane-procedu...
>“It appears the flight crew reactivated electric trim,” former Boeing engineer Peter Lemme said. “But they only made a very small nose up adjustment - I would have expected them to immediately and without stopping move the stabilizer back into trim. The last MCAS command comes 5 seconds after their last manual trim command.”
This does appear very strange to me. Why let go of the electric trim before getting to neutral or even a bit nose up? Did they think the trim could only be used in small increments or something? Were they so focused on the mystery of what was causing the trim adjustments that they didn't think to just jam down the electric trim switch until trim neutralized?
https://projects.seattletimes.com/2019/boeing-737-max-12-pro...
Here is another good article that summarizes what happened. Seems to me that there are essentially 3 ways the flights could have been saved although I'm less sure about your method of just electric trimming to neutral and then hitting CUTOFF because the electric trim adjustment would have to be fast enough to overcome the MCAS counter-adjustments. Surely electric trim would not have been designed for such a race.
And also that seems like such an obvious thing to do even if you haven't read the airworthiness directive you cite. Something is messing with the trim. There is a button that adjusts trim ffs. Why not try to just hold it down? Even a child might think of that simple solution. But these pilots didn't? Some of them were even experienced.
The other two methods are lowering the flaps which seems to have worked well for them even if it was by accident or slowing down the plane and then hitting the CUTOFF switches and hoping you can spin the trim wheels fast enough. Probably the Ethiopian pilots were unaware of the airworthiness directive and reverted back to the standard runaway trim procedure without realizing their high speed would make the wheels more or less impossible to turn. I am not a pilot so I am not clear on how easy it is to slow down a plane that is already in the nose down position. Gravity is a harsh mistress.
Yes, and it did indeed work. The pilots, though, did not cut off the stab trim.
> This method seems to depend on the electric trim being fast enough to fight MCAS to a neutral or near neutral trim even from a maxed trim stab position. Is it fast enough to do that?
Yes, and it doesn't "fight" MCAS. It overrides it electrically in hardware (not software).
> I'm less sure about your method of just electric trimming to neutral and then hitting CUTOFF because the electric trim adjustment would have to be fast enough to overcome the MCAS counter-adjustments. Surely electric trim would not have been designed for such a race.
I'm sure about it. The electric trim moves just as fast as the MCAS would, because the trim is electrically ON or OFF. There's no speed control on it. It's not a race, either. The electric trim switches are between the MCAS and the motors, they override it.
Furthermore, in the LA flight before the LA crash flight, the same problem happened. The pilots restored trim and hit the cutoff switches, and landed safely. The mystery to me was why that airplane was allowed to take off again before being repaired.
> And also that seems like such an obvious thing to do even if you haven't read the airworthiness directive you cite. Something is messing with the trim. There is a button that adjusts trim ffs. Why not try to just hold it down? Even a child might think of that simple solution. But these pilots didn't? Some of them were even experienced.
Exactly, and that's what the pilots did in the first non-crashing incident.
> Probably the Ethiopian pilots were unaware of the airworthiness directive
Yup, and that was a contributing factor to the crash.
1. use the electric trim switches to drive the trim to normal
2. cut off the trim system with the console cutoff switches.
That's it. As simple as that. And it is NOT what the EA pilots did (they cut off the trim first).
Here are the exact directions:
"Initially, higher control forces may be needed to overcome any stabilizer nose down trim already applied. Electric stabilizer trim can be used to neutralize control column pitch forces before moving the STAB TRIM CUTOUT switches to CUTOUT. Manual stabilizer trim can be used before and after the STAB TRIM CUTOUT switches are moved to CUTOUT."
https://theaircurrent.com/wp-content/uploads/2018/11/B737-MA...
Why they didn't read, remember, or follow the EAD instructions is anybody's guess, as I've never heard of any investigation into that aspect.