News for hackers. Stuff that matters.
Re:Moldova Shuts Down Bootleg Helicopter Factory by TheSpiceIsLife on Wednesday July 01, 2020 @09:18PM (#23708918)
When we’re in the realm of aircraft engines, I’d like to imagine continuous rated power isn’t also peak power?

Is this not the case?

Re:Moldova Shuts Down Bootleg Helicopter Factory by dpe82 on Wednesday July 01, 2020 @11:21PM (#23709631)
Depends on the aircraft and engine. Some (like my little Rotax 912ULS) has a peak power at which I can only operate at for 1 minute during takeoff. I typically cruise around 70% peak.

I believe in Helicopters you're often running at 90%+ max rated power, but on an engine that's derated from its true maximum power.

Re:Moldova Shuts Down Bootleg Helicopter Factory by slavak on Thursday July 02, 2020 @07:41AM (#23712106)
Your Rotax is limited to 5 continuous min. at 5800 rpm, or a max continuous RPM of 5500. There's no setting at which you are limited to only 1 min.
Re:Moldova Shuts Down Bootleg Helicopter Factory by dpe82 on Thursday July 09, 2020 @01:25AM (#23777181)
Ah yes you're correct. I use 1 minute as my personal limit so I don't grow accustomed to running it too hard for too long, but the operator's manual indeed states 5 minutes above 5500. I have a fixed pitch prop, which means I typically can only spin the prop at those speeds during cruise anyhow.
Re:Moldova Shuts Down Bootleg Helicopter Factory by jaclaz on Thursday July 02, 2020 @06:25AM (#23711760)
Generally speaking on combustion (piston) engines the max torque (and efficiency) is at revs between 2/3 and 3/4, sometime 4/5 of power peak revs, and in "static" applications (i.e. when you don't have an accelerator that you use continuously) such as aviation but also power generators, hydraulic loaders and excavators, etc. they normally are operated (continuously) at those levels range (around max torque).
Re:Moldova Shuts Down Bootleg Helicopter Factory by ashtonkem on Wednesday July 01, 2020 @09:36PM (#23709044)
I can’t speak to helicopters, but light aircraft engines tend to run at 80% of peak; peak is only used for takeoff and go around, to my knowledge. (Not a pilot)