News for hackers. Stuff that matters.
Re:The Acorn Archimedes was the first desktop to use the ARM... by fiddlerwoaroof on Friday June 26, 2020 @12:58AM (#23648845)
I’m not a hardware person, really, but—even with EFI—my understanding is that x86 motherboards all implement standards that specify how the motherboard’s features can be accessed from software in a way that is fairly uncommon in ARM/MIPS/etc.
Re:The Acorn Archimedes was the first desktop to use the ARM... by yjftsjthsd-h on Friday June 26, 2020 @02:29AM (#23649286)
Basically correct; the key bit is that x86 usually has a bus that can be enumerated by the OS. So you boot, and the OS can look around and see what hardware it has (and where it all is). On most ARM, the OS boots blind and you have to tell it (usually via device tree) what devices are attached and where.
Re:The Acorn Archimedes was the first desktop to use the ARM... by vertex-four on Friday June 26, 2020 @04:01AM (#23649769)
There's a spec for putting a device tree in an ARM chip's rom, the problem being that it's often wrong in some way, requiring device-specific corrections.

Note, however, that there's a lot of "quirks" and similar device-specific corrections for x86 as well. These get presented to Microsoft by the manufacturer, and Linux gets to reverse-engineer them.

Re:The Acorn Archimedes was the first desktop to use the ARM... by yjftsjthsd-h on Friday June 26, 2020 @05:32PM (#23657292)
> There's a spec for putting a device tree in an ARM chip's rom, the problem being that it's often wrong in some way, requiring device-specific corrections.

I was aware of being able to have ex. u-boot pass a device tree file to the kernel at boot time; are you talking about that, or something more generic?