Re:WD Passport 4TB drives don't support WRITE SAME command
by duskwuff on Thursday March 26, 2020 @02:15PM
(#22696273)
USB Mass Storage has its own command set. Some newer USB3 adapters do allow SCSI commands to be passed through using UASP, but not all do.
[ Parent
| on HN ]
Re:WD Passport 4TB drives don't support WRITE SAME command
by bayindirh on Thursday March 26, 2020 @03:39PM
(#22697107)
Some, if not most, USB2 to SATA/SAS bridges also allows passing these commands. smartctl can talk with most of the bridges to pass-thru commands, at least for SMART purposes.
Seagate's 3.5" Backup Plus Hub drives mask the disk itself intentionally to show itself as a different, generic Seagate device, probably to prevent people from messing with the disk settings and identifying the disk itself.
Re:WD Passport 4TB drives don't support WRITE SAME command
by pavon on Thursday March 26, 2020 @09:44PM
(#22699817)
And even if they support it, it isn't always safe to do so. For example, I have a WD Passport sitting on my desk that was bricked when I issued an ATA secure erase command[1]. Don't assume that any SATA/SCSI commands are safe to issue to USB drives unless you have researched it.
Re:WD Passport 4TB drives don't support WRITE SAME command
by dreamlayers on Thursday March 26, 2020 @11:09PM
(#22700128)
Probably the USB interface keeps some data for its encryption function on a part of the hard drive which it makes inaccessible. You erased the whole hard drive, including that part, and probably caused the USB interface to malfunction.