In the late 90s I had a 486sx33 with one of those Cyrix 586 upgrade chips for the math co-processor slot. It was so hot it had a fan on it! Crazy!
I also maxed out the RAM to 32mb and upgrade the SRAM in my Trident video card so I could do 256 color in Windows 95.
I also had a 40mb Erwin Tape Drive for backing up my 100mb HDD. It wasn't fast but it was faster than reinstalling Tie Fighter from Floppies.
The "math co-processor" chip was actually a full DX33 and your SX33 CPU was disabled.
Re:SETI@home shuts down after 21 years
by nonamenoslogan on Tuesday March 03, 2020 @08:58PM
(#22480571)
My first was an AMD 286 @ 12MHz, still have it in a cigar box somewhere.
Re:SETI@home shuts down after 21 years
by willvarfar on Tuesday March 03, 2020 @11:06PM
(#22481117)
Started with a zx81, graduated to a 286 with a whopping 2MB RAM, which was really really much, but at a time when everyone else was getting 386s.
CyrixInstead ™ represent!
Re:SETI@home shuts down after 21 years
by testingworks1 on Thursday March 05, 2020 @09:52PM
(#22500625)
Waay back in the day.. 286 12mhz with 1mb ram and a 10mb RLL drive. Setting the jumpers on the drive controller block was a nightmare that I still have. I think there were 16 or 32 pins and all the jumpers had to be just right or no dice (no drive). Further along I had a 40mhz Cyrix 4x86 I think, with 4mb ram and a Trident VGA 256 color card. I remember the ram being old school block chips and not SIMM modules. It's been a long time, so I could be mistaking the memory type between mobos. Was a great 3.11 machine for the time.
Good times. Nowadays I just buy a laptop with everything soldered on it and complain a lot if I have to reboot it every month.