News for hackers. Stuff that matters.
Re:I built a DIY license plate reader with a Raspberry Pi an... by simon_000666 on Monday February 24, 2020 @03:19AM (#22402483)
Ok, I have a use case for this. If you could figure out how to get it off the cloud and low power, it would be awesome to have one of these on the gates to my house, so when I drive up the plates are automatically recognized and the gates open to my car.
Re:I built a DIY license plate reader with a Raspberry Pi an... by irl_ on Monday February 24, 2020 @06:05AM (#22403090)
The best password is the one written in plaintext on the outside of your car.
Re:I built a DIY license plate reader with a Raspberry Pi an... by Piskvorrr on Monday February 24, 2020 @08:01AM (#22403637)
Don't rely on garage openers for security, either: the door relies on a rather simple password scheme. In other words, treat it as a garden fence, not a blast door.

https://www.geek.com/gadgets/a-32-hacking-tool-can-open-your...

(Perhaps recognizing the car's license plate plus MAC address would be more secure...? Many cars use BT/WiFi nowadays.)

Re:I built a DIY license plate reader with a Raspberry Pi an... by thecatspaw on Monday February 24, 2020 @06:57AM (#22403319)
I dont think its supposed to be a safety feature, the gate is probably not locked.
Re:I built a DIY license plate reader with a Raspberry Pi an... by CheesecakeFred on Monday February 24, 2020 @03:47AM (#22402580)
I think the problem here is pretty obvious.
Re:I built a DIY license plate reader with a Raspberry Pi an... by netsharc on Monday February 24, 2020 @05:28AM (#22402959)
I wonder if the ML would also recognise hand-drawn licence plates?

https://papersplease.fandom.com/wiki/Fake_passport

Re:I built a DIY license plate reader with a Raspberry Pi an... by irl_ on Monday February 24, 2020 @06:06AM (#22403098)
Re:I built a DIY license plate reader with a Raspberry Pi an... by michaelt on Monday February 24, 2020 @05:12AM (#22402893)
You can buy systems like this already. Here's a video of one being opened with a hand-drawn number plate: https://youtu.be/box6dX44NoU?t=50
Re:I built a DIY license plate reader with a Raspberry Pi an... by darkarmani on Monday February 24, 2020 @09:14AM (#22404076)
Better to use the tire pressure sensors and a software defined radio module to pick up the unique identifiers of your wheels. Way lower power than OCR.