News for hackers. Stuff that matters.
Re:Tesla X parts that had to be replaced after 400k miles by frosted-flakes on Sunday February 23, 2020 @11:06PM (#22401560)
There kind of is. The Chevrolet Express/GMC Savannah vans have remained largely the same since the late 1990s. The design of the headlights and grill have changed a few times, and there are several different versions of the engines, but stuff like brake systems, heater controls and fans, seats, instrument panel, etc. are more or less the same.

I don't think GM makes passenger versions anymore, but the cargo vans are still super common in my area (southern Ontario).

Re:Tesla X parts that had to be replaced after 400k miles by Paperweight on Sunday February 23, 2020 @11:45PM (#22401716)
Have they actually improved its weaknesses, though, besides upgrading the engine from time to time?

For example, today I replaced a front wheel hub-bearing on a FWD car. These are designed with a cast steering knuckle that the axle goes through. The bearing assembly is mounted on the front of the bore, the axle goes through the bore into the hub-bearing from the back, and there's a little seal on the back of the bore that the axle rides on.

Diagram: https://upload.wikimedia.org/wikipedia/commons/9/91/Steering...

The weakness is that water inevitably gets into the bore around the back seal (since the axle moves around a bit) and the only way out is through the bearing out the front. It rusts out. Nobody has improved this design for the past 50 years, as far as I am aware. Perhaps a weep hole? Perhaps they need to be completely filled with grease?