News for hackers. Stuff that matters.
Re:What made the 1960s CDC6600 supercomputer fast? by dfox on Saturday February 15, 2020 @11:47AM (#22336285)
The toolchain does not have to run on the supercomputer itself. Most supercomputer architectures have self-hosting toolchains there are also supercomputers that do not. Also compiling or even debugging programs directly on the machine is in most cases plain waste of (expensive) computing resources and it is not that one would ever have only the supercomputer and not any other computers (in fact, many traditional supercomputers cannot boot on their own and have to be booted by some kind of frontend computer).
Re:What made the 1960s CDC6600 supercomputer fast? by kps on Saturday February 15, 2020 @01:09PM (#22336813)
> many traditional supercomputers cannot boot on their own and have to be booted by some kind of frontend computer

CDC went all in on this. Their large computers had ‘peripheral processors’ (for the CDC6600, based on the CDC160) that essentially ran the OS, leaving the main processor free for what it was good at.

Re:What made the 1960s CDC6600 supercomputer fast? by monocasa on Saturday February 15, 2020 @01:30PM (#22336947)
You'd be surprised how true that is today too.

The Wii and WiiU run most of the "OS" on an external ARM core "Starlet"/"Starbuck". All I/O, network access, encryption for SSL, booting the main cores, the USB stack, etc. is on that ARM core, not the main PowerPC cores so those can be dedicated to running "game code".

The Cell in the PS3 is a SPI slave that gets booted by an external processor.

The PS4 is the same way, and that external core holds most of the filesystem (how game updates happen with the console "off").

And then most SoCs (including most AMD and Intel chips) boot system management cores (ME/PSP/etc.) that then is responsible for initializing the rest of the core complexes on the chip. Pretty much every ARM SoC sold these days will talk about how they have a CortexM3 in addition to they CortexA cores; that's what it's for. SiFive's Linux capable chip has one of their E series cores in addition to their U series cores for the same purpose on the RISC-V side of things.

Re:What made the 1960s CDC6600 supercomputer fast? by sjburt on Sunday February 16, 2020 @01:10AM (#22340091)
> Pretty much every ARM SoC sold these days will talk about how they have a CortexM3 in addition to they CortexA cores; that's what it's for.

Usually the advertised-on-the-datasheet M cores are available for user code and you'll get a virtual serial port or some shared memory to go between them and the big core. I don't doubt that there are additional hidden cores taking care of internal power management, early boot etc.

At least, this is how it is on the STM32MP1 and the TI Sitara AM5 socs.

Re:What made the 1960s CDC6600 supercomputer fast? by mark-r on Saturday February 15, 2020 @07:47PM (#22339090)
That overstates the case a little. The peripheral processors didn't run any user code, in particular the compilers still used the main processor.
Re:What made the 1960s CDC6600 supercomputer fast? by BadThink6655321 on Saturday February 15, 2020 @02:25PM (#22337324)
You are confusing theory with practice. Back then, computers were expensive and rare. The general student population at my university had two choices: the CDC 6400, or an HP time-sharing system that ran BASIC. A friend and I actually wrote a complete toolset in BASIC that allowed students to learn HP-2100 assembly language. (I did the editor and assembler, he did the emulator and debugger). But writing a PASCAL cross-compiler in BASIC, that output a paper tape of COMPASS, or binary? No way. Or FORTRAN, SNOBOL, Algol, ...
Re:What made the 1960s CDC6600 supercomputer fast? by mark-r on Thursday February 20, 2020 @06:17PM (#22379533)
I learned FORTRAN on a HP 2000C timesharing system, using a FORTRAN emulator written in BASIC. It was dog slow, but it worked. I have no idea where the emulator came from.
Re:What made the 1960s CDC6600 supercomputer fast? by tpmx on Saturday February 15, 2020 @12:21PM (#22336506)
Did they also have that at launch time(s), back in the 60s/70s?
Re:What made the 1960s CDC6600 supercomputer fast? by B1FF_PSUVM on Saturday February 15, 2020 @01:52PM (#22337102)
I believe so, the comp. arch. textbooks were pretty emphatic on the description of the CDC 6600 as "full of peripheral processors", e.g. for I/O and printing, etc. Deliberately, not something tacked on later as an afterthought.
Re:What made the 1960s CDC6600 supercomputer fast? by dfox on Saturday February 15, 2020 @05:24PM (#22338449)
I cannot find any information about whether one of the peripheral processors in CDC 6600 (which were full-blown CPUs, not glorified DMA engines as in Cray-1 or System/360) has some kind of system management role. On the other hand Cray-1 needs not one, but two frontend computers to work (one is DG Nova/Eclipse supplied by Cray which actually boots the system and second one has to be provided by customer and is essentially an user interface)
Re:What made the 1960s CDC6600 supercomputer fast? by vajrabum on Monday February 17, 2020 @02:17AM (#22346121)
The peripheral processors were integral to the CDC 6600 and it's successors (6400,6200,6700,7600, and Cyber 70 series) built inside the same mainframe cabinet. In the 6000 and Cyber 70 series There were '10 of them' that shared the same ALU with a barrel shifter that would shift 12 bits after each instruction. That shift would load the registers for the 'next PP' in a round robing fashion. They were pretty primitive. There were no index registers so self modifying code was a regular thing and polling was the only method of IO supported at least at first. I think the later models did support some sort of DMS. The PPs did have access to the 60 bit main memory and there was an instruction exchange jump or XJ which would load the register block and switch between user and supervisor modes.
Re:What made the 1960s CDC6600 supercomputer fast? by pinewurst on Sunday February 16, 2020 @12:56PM (#22342792)
What do you mean? The CDC OSes actually ran on the PPs and for all intents and purposes managed the system. The two-headed video console was hardwired to a PP as well, and used to managed the system.