Is it actually limited to Sata 3 speeds? Assuming ExpressCard can at least get you a PCI Express 2.0 lane I’d expect it to be at least a couple hundred MB/s faster at least theoretically. Also I assume NVMe’s long command queue really benefits SSD performance for random access, so I suspect it may even be worth it just for the interface...
The PCIe 2.0 standard doubles the transfer rate compared with PCIe 1.0 to 5 GT/s and the per-lane throughput rises from 250 MB/s to 500 MB/s.
So it's actually less than SATA 3 speeds (600MB/s)
Re:ThinkPad Mods, Done Right
by yttriumtyclief on Sunday February 02, 2020 @09:41PM
(#22220997)
The intention isn't to be faster than the internal bay, it's to add another drive to machines with limited drive support. For instance, X230 only has a single SATA3 drive accessible. You can add an mSATA, but they don't come in very large capacities and the mSATA slot is limited to SATA2. This mod adds a third drive, one that goes up to 2TB at ~SATA3 speeds. So, depending on the model, it can either be a nice addition or a huge addition.
Wouldn’t you get some (minor?) battery life improvements from swapping out the spinning 2.5” with an SSD?
Re:ThinkPad Mods, Done Right
by LeifCarrotson on Sunday February 02, 2020 @11:41AM
(#22217781)
It's not SATA, it's NVMe.
And vintage ThinkPad enthusiasts are not typically concerned about weight unless they're going for "more is better".
its pcie 2.0, slower than sata3
Re:ThinkPad Mods, Done Right
by LeifCarrotson on Sunday February 02, 2020 @09:38PM
(#22220987)
500 vs 560 MB/s, but more efficient... it's a tossup IMO.
Some of the future mods though look very cool. I particularly would like the Unifying Mod & WHQD mods.