It's a very exciting time to be living in. I have three printers. The first printed the second. The second printed the third. I've made a number of things which turned from idea to design to prototype within hours to days. Then I tweak, hit print again and I've got production. No tooling, no waiting.
Many lattice structures can still be made using injection molding equipment (far cheaper) or starting with a raw material with such a structure: think of aluminum honeycomb.
I agree 3DP is exciting, but we need to get real about what we're trying to achieve - traditional manufacturing engineers are pretty clever too. Not every STL should be run through a nozzle...
FDM is actually one of the worst methods for 3DP manufacturing because it scales linearly - MakerBot et al use this tech because it's the easiest process to build and makes durable parts from common raw materials.
I fully agree that you can get lattice structures in a number of processes, but printing is the only reasonable way to get internal, closed lattice structures. And I believe the article was meant to create awareness of a reasonably unknown process, rather than claim that everything else should step aside. Milling, routing, turning and molding aren't going anywhere. But that doesn't make printing any less impressive in the areas it's good at.
FDM scales linearly, which is a good thing and a bad thing. It means you have no cost savings when you make large quantities of the same object, but it also means you have no additional cost to make a different object every time. That's what I think is most exciting about it.
Use 3D printing instead of milling or whatever for prototype.
Use 3D printing instead of whatever for mass production.
Use 3D printing at point of use.
Simple example: I bought a porcelain teapot a few weeks ago. A few days later we broke the lid. So I bought a new teapot. (The old teapot with the broken lid is sitting on a window sill above the kitchen sink, waiting for glue. A tube of glue costs a substantial fraction of the price of the teapot.)
3D printing could eventually lead to a tectonic shift away from planned obsolescence and disposable culture (which, let's face it, is purely an artifact of mass production).
FYI - we can print in ceramics now - so that lid is replaceable if you've got a file ;-)
I think we are not that far away from a self contained fabricator that turns garbage into everyday plastic parts you need.
It's a little dream I have. :-)
FWIW though - the 90% they're referring to is the delta between machining solid parts and printing them. It should be added that this is a rare use-case for 3D printing.
Usually it competes more directly with injection molding technologies that often have better material usage because there is no need for support material - which goes to waste holding up the hollow areas for the types of material-saving lattice structures they're talking about.
Sometimes you can get great savings, but 3D printing isn't a production materials panacea. Let's not even get into how to recycle composite materials (very energy intensive) and photopolymers (you can't).