Re:Boeing 777X: World’s largest twin-engine jet completes fi...
by Reason077 on Sunday January 26, 2020 @12:23PM
(#22153275)
"the NG, which had to use these weird flattened turbofan nacelles in order to get enough ground clearance"
I believe your picture actually shows the 737-300 (Classic), which had a very obvious flat-spot in it's nacelles. The NGs do also have a slight "flat spot", but it's much less obvious.
And this issue was already stark on the NG, which had to use these weird flattened turbofan nacelles in order to get enough ground clearance despite its much larger engines:
* 737-NG https://upload.wikimedia.org/wikipedia/commons/c/ce/CFM_56_L...
* 787 https://upload.wikimedia.org/wikipedia/commons/7/70/787_-_Fl...
And even with that they also had to mount the engines way ahead of the wing, clear off of it: https://en.wikipedia.org/wiki/File:N707SA_Southwest_Airlines...
Now this looks a lot like an A320 where the engine is also ahead of the wing[0] but notice how the engine "strut" goes downwards on the 320 but has to "wave up" on the 737NG.
It's very clear on the side-view drawings:
* A30x https://upload.wikimedia.org/wikipedia/commons/9/92/A32XFAMI...
* 737 https://upload.wikimedia.org/wikipedia/commons/b/bc/B737Fami...
where you can also see the side-structure of the original 737 and its low-bypass turbofan (0.96:1 compared to 5:1 to 6:1 for the NG's engine).
[0] https://en.wikipedia.org/wiki/Airbus_A320_family#/media/File...