A RISC-V linux system for the ECP5 can be built with the FOSS toolchain using vexriscv and litex:
https://github.com/litex-hub/linux-on-litex-vexriscv
also, step by step using a different core (rocket): https://insights.sei.cmu.edu/sei_blog/2019/10/how-to-build-a...
Re:RISC-V Stumbling Blocks
by jhallenworld on Thursday January 02, 2020 @03:29PM
(#21939448)
I'm amazed to see the preferred toolchain for LiteX for ECP5 listed as "Yosys/Trellis/Nextpnr" (and vendor proprietary tools for the other families).
The rocket core mentions 102% of space used of an 85K LUT FPGA and having to deal with it. I wonder which core is using so much space? I have more experience with vendor soft cores, and they would use much less..
Anyway, I got this example from Project Trellis to work on this board. It uses this "PICO RISC-V" (the entire CPU is in a single Verilog file):
https://github.com/SymbiFlow/prjtrellis/tree/master/examples...
I think it would be straightforward to build a Linux capable RISC-V system for this board using this free tool chain. The board has SDRAM, FTDI UART and SPI-flash. It does not have an SD slot, but maybe could be wired in with the expansion headers.
This ULX3S board also looks promissing, but is not available yet:
https://www.crowdsupply.com/radiona/ulx3s
What's very cool is that low end ECP5 FPGAs are around $5. I think RISC-V on an ECP5 with LCD touch interface might be the cheapest available option for a Linux microcontroller with a touch LCD interface. By available, I mean where you can easily buy the chips on mainstream distributors (otherwise it would for sure be some AllWinner chip).