Re:New Material Breaks World Record Turning Heat into Electr...
by debrice on Tuesday December 31, 2019 @01:54PM
(#21923444)
Iād suggest doing that operation on the outdoor side exhaust where the heat loss would be irrelevant.
Re:New Material Breaks World Record Turning Heat into Electr...
by arghwhat on Tuesday December 31, 2019 @08:18PM
(#21925967)
I doubt there's enough heat to extract there. Low-pressure exhaust gas is useless, and I don't think a metal chimney exiting out through a wall would conduct enough heat on the outside on its own.
Re:New Material Breaks World Record Turning Heat into Electr...
by learc83 on Tuesday December 31, 2019 @10:32AM
(#21921613)
A small stirling engine would be easier and safer than a steam setup.
Re:New Material Breaks World Record Turning Heat into Electr...
by 8bitsrule on Tuesday December 31, 2019 @11:20AM
(#21922099)
The good ol' Stirling engine was tried out -- at a few locations in the US Southwest 10 years back -- to generate megawatts of solar-powered electricity (25kW per engine) at the focus of parabolic mirrors.
It got beat out by subsidized Chinese-produced PV panels (SES was forced into bankruptcy).
https://en.wikipedia.org/wiki/Applications_of_the_Stirling_e...
Re:New Material Breaks World Record Turning Heat into Electr...
by abdullahkhalids on Tuesday December 31, 2019 @01:14PM
(#21923096)
My senior year project ten years ago was exactly this - solar thermal + a Stirling engine. When we started the project, we estimated it 20% or so cheaper than solar PV. In that one year solar prices halved or so, leaving us at a dead end.
I ended up consulting with leather plant for their hot water needs via solar thermal. At least that is still viable.
Re:New Material Breaks World Record Turning Heat into Electr...
by 8bitsrule on Tuesday December 31, 2019 @01:40PM
(#21923284)
Interesting. I just learned about that energy combo, and Stirling also makes a lot of sense for someone with a non-solar heat source!
Amazing how China came along at the time it did. The hardball politics aimed against US solar startups since Carter has been a fascinating tale with little mainstream coverage.
Re:New Material Breaks World Record Turning Heat into Electr...
by arghwhat on Tuesday December 31, 2019 @08:04PM
(#21925918)
I'd argue that a steam setup is considerably easier and more proven, but a Stirling engine is certainly safer and more efficient.
(A homemade setup would not be very efficient regardless of technology chosen, so I'm ignoring complexities of elaborate high-performance boilers.)
You'd get much better result by making a small steam plant with the same setup: boil water on stove, drive plant (turbine or piston), condense outside, repeat.
However, if you really want to do this with TECs, stack them to lower the per-unit temperature differential, or distribute the heat energy over a larger area and run them in parallel.