News for hackers. Stuff that matters.
Re:Arduino programmable air, pneumatics kit by Animats on Monday December 30, 2019 @11:25PM (#21918934)
You have to get the valve very close to the cylinder for this to work at all well, so you don't have the air in the hoses acting as an air spring. The proportional valves have to be fast, which is usually expensive. That gets the lag down to the point that the thing becomes stably controllable. [1]

There was an effort at CWRU to build legged robotics this way around 2008. Site seems to be down.[2]

[1] https://www.hydraulicspneumatics.com/technologies/other-tech...

[2] http://biorobots.case.edu/projects/onrprojects/robot3/

There are no comments on this comment yet.