News for hackers. Stuff that matters.
Re:Debugging a Live Saturn V by pjc50 on Sunday December 22, 2019 @12:33PM (#21858422)
I thought "NASA will have a spec for this", and sure enough a bit of Googling finds this from 1973: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/197300... which references "Teledyne 422" relays. That is https://www.teledynerelays.com/Datasheets/420422.pdf , which claims 30g at 3000Hz. Apparently by using strong fields over short distances.

(The first PDF is worth scrolling to the end for a full set of neat hand-drawn mechanical and circuit diagrams. No CAD back then!)

Re:Debugging a Live Saturn V by userbinator on Sunday December 22, 2019 @03:14PM (#21859352)
Those are still available, but as expected, not cheap:

https://www.mouser.com/Teledyne-Relays/Electromechanical/Rel...

They are around $100 each.

Re:Debugging a Live Saturn V by kevin_thibedeau on Sunday December 22, 2019 @01:45PM (#21858840)
Latching relays don't need to rely on field strength to hold contacts in place. Then it's just a mechanical design problem.
Re:Debugging a Live Saturn V by gumby on Monday December 23, 2019 @06:56AM (#21863080)
In launch phase they presumably had plenty of power; I was thinking of mechanical chatter (rising) in the contacts.
Re:Debugging a Live Saturn V by gumby on Monday December 23, 2019 @06:55AM (#21863071)
All the tables and forms were typed and likely re-typed as well. Photocopiers did exist but were uncommon.