When you have only a few giant chips per wafer, each error becomes devastating, taking out a large fraction of the wafer. Errors are so common I wouldnt be surprised if it took them 5-10 wafers per working chip, especially if they dont do any binning or they didnt design the chip to fuse off bad sections like Intel CPUs do (a single i3/i5/i7/i9 line is usually the same exact chip, with cores that have too many manufacturing errors fused off so perfect parts become i9s, less perfect parts become i7s, etc).
In the case of Cerebras, they have disable the bad blocks to get chips that actually work.
So, someone like Cerebras has to both make as little critical as possible and buy much more expensive wafers with lower defect rates and still get only moderate yields.
How do you do that ? where do i read more about this ?
Better wafers cost more.
That probably means their wafer yield is 100%.
As for wafer prices: https://anysilicon.com/major-pure-play-foundries-revenue-per...
It's $6k for all wafer smaller than 20nm, which means 16nm is somewhat cheaper than that.
Not trying to crap on the tech, but it's not so simple as we can merely go to the fab and get small quantities of full custom, 100% yielding chips, for 6k ea.
That doesn't make any sense because errors are an inherent part of the manufacturing process. If errors in the manufacturing process make 1% of the area unavailable that means perfect yields could at most be 99%.
That means we'll need 200 such chips.
Why is the wafer so expensive ? Buying a manufactured wafer from TSMC ,16nm is I think is $4k-5k
And there are still a few nodes left. While cost per gate don't go down much, it could solve some of the external bandwidth issues.
But all those things are really expensive and very risky. Who knows...