Re:Arm and TSMC Showcase 7nm Chiplet, Eight A72 at 4GHz on C...
by benj111 on Sunday September 29, 2019 @04:33AM
(#21105890)
"Raspberry Pi's RAM chip is stacked on top the CPU"
Fyi, I don't think this is done in the most recent Pi 4
Re:Arm and TSMC Showcase 7nm Chiplet, Eight A72 at 4GHz on C...
by hinkley on Sunday September 29, 2019 @07:15PM
(#21110258)
I can't imagine the kind of quality control you have to have to have to achieve a useful yield, performing a lithography operation one hundred times on the same piece of silicon.
Re:Arm and TSMC Showcase 7nm Chiplet, Eight A72 at 4GHz on C...
by baybal2 on Sunday September 29, 2019 @08:51AM
(#21106742)
Even 3D NAND is not the honest monolithic 3D, as it uses edge bonding and not real metal layers for word lines
Re:Arm and TSMC Showcase 7nm Chiplet, Eight A72 at 4GHz on C...
by floatboth on Sunday September 29, 2019 @07:03AM
(#21106359)
Is HBM also stacked in layers? IIUC there's like four layers of memory on each HBM2 die
Re:Arm and TSMC Showcase 7nm Chiplet, Eight A72 at 4GHz on C...
by Bayart on Sunday September 29, 2019 @10:31AM
(#21107239)
Yeah it's 3D-stacked. 4 layers for HBM, 4 for HBM and 12 for HBM2E.
It's neat but really expensive, and I don't think the gains for RAM in that sort of designs are that big compared to computing cores outside of edge cases.
A single IC die (a "chiplet" when stacked on others) is made of a layer of transistors and wiring up to several hundred nanometers thick on top of a much thicker (several hundred micrometer) silicon wafer substrate.
Yep, stacking these dies ("chiplets") on top of one another is one form of 3D, and is definitely useful: IIRC, AMD's recent popular Ryzen 3000 line uses chiplets, and the Raspberry Pi's RAM chip is stacked on top the CPU (in a much cruder post-IC-manufacturing assembly process). The shorter distance between dies (compared to placing them in separate plastic packages on a PCB) can lead to maybe an order of magnitude improvement (in speed/power/etc). It's hard to stack more than a few layers.
The most ambitious form of 3D design (and the one most people probably think of) is multiple thin layers of transistors on a single die ("monolithic 3D"); this would give maybe another order of magnitude improvement. Monolithic 3D memory chips are becoming popular (V-NAND, etc), with the most recent at ~100 layers. Monolithic 3D CPUs are still an unsolved problem because they need different, more difficult process steps and better heatsinks (but we're close!).