News for hackers. Stuff that matters.
Re:Technician keeps computer made in 1959 still humming along by mirimir on Tuesday July 30, 2019 @03:58PM (#20568514)
I suspect that parent wonders what it does now. Which is likely ~nothing. But I am curious how it compares with current machines. Comparable to an i5 desktop? Or to a smartphone?
Re:Technician keeps computer made in 1959 still humming along by Carioca on Tuesday July 30, 2019 @04:06PM (#20568584)
Here's a comparison between a RPi Zero and a 1957 Elliott 405 (from the UK): https://www.spinellis.gr/blog/20151129/

On a simple clock comparison, it was about a million times slower than a Raspberry Pi Zero. Computing has come a LONG way

Re:Technician keeps computer made in 1959 still humming along by kalenx on Tuesday July 30, 2019 @04:01PM (#20568538)
Probably roughly equivalent to the chip equipping your microwave, if it's not too recent. Except that your microwave chip is most probably faster and more reliable.
Re:Technician keeps computer made in 1959 still humming along by blacksmith_tb on Tuesday July 30, 2019 @04:00PM (#20568535)
With 13K of memory[1] I doubt you could compare it to anything modern bigger than the simplest e-toy...

1: http://museum.ipsj.or.jp/en/heritage/facom128b.html

Re:Technician keeps computer made in 1959 still humming along by mirimir on Tuesday July 30, 2019 @04:33PM (#20568831)
True, but some of those old machines could do amazing stuff with ~huge datasets. Basically by just doing one ~simple operation per data pass. Read, do something simple, write. Then repeat that as many times as needed, with a different operation. Sort of like executing a program one line at a time.
Re:Technician keeps computer made in 1959 still humming along by rbanffy on Tuesday July 30, 2019 @05:30PM (#20569398)
They did crazy tricks because timesharing wasn't invented and whatever program was running had the full machine to itself. Also, designers of these computers usually built everything around the flow of data so that a CPU would have as little as possible to do to read tapes or cards.
Re:Technician keeps computer made in 1959 still humming along by mirimir on Tuesday July 30, 2019 @07:22PM (#20570228)
Right. And there wasn't much "full machine" to have.
Re:Technician keeps computer made in 1959 still humming along by monocasa on Tuesday July 30, 2019 @04:32PM (#20568816)
It's about an Arduino with a 10x slower clock.
Re:Technician keeps computer made in 1959 still humming along by mrob on Wednesday July 31, 2019 @01:49AM (#20571975)
An Arduino Uno runs at 16MHz, and averages about 1.5 instructions per clock (estimated by multiplying the best case 1 instruction per clock by 1.5), so about 11M instructions per second.

The FACOM128B is asynchronous, and takes about 0.15s per instruction using the same estimation (1.5x best case), so about 7 instructions per second. See timings at: http://museum.ipsj.or.jp/en/computer/dawn/0012.html

However, the FACOM128B is 69bit, and the Atmega is only 8bit (it can do some 16bit operations, but those are limited to certain registers and operations, so I'll just assume it's only 8bit). 69 is about 9 times bigger than 8, so I'll assume the FACOM128B can do about 9 times as much work per operation (there is overhead in calculating wider results from narrow operations, but the full width isn't always needed, so this simple estimate seems reasonable to me).

Therefore the FACOM128B is like an Arduino with about a 190000x slower clock.

Re:Technician keeps computer made in 1959 still humming along by mirimir on Wednesday July 31, 2019 @01:08PM (#20576170)
Nice estimate. And not surprising, given that it uses relays. Not even vacuum tubes.