Re:Lockheed's Skunk Works Building Bigger Fusion Reactor
by pfdietz on Saturday July 20, 2019 @10:47AM
(#20486043)
Fusion reactors, unlike fission reactors, are best in the smallest workable units. That's because they are limited by the power/area at the first wall, so (by the square-cube law) their volumetric power density gets worse as one makes them bigger.
[ Parent
| on HN ]
Re:Lockheed's Skunk Works Building Bigger Fusion Reactor
by inflatableDodo on Sunday July 21, 2019 @12:52AM
(#20490013)
How far can this premise be pushed? And will I one day be able to get it in a surface mountable package?
Re:Lockheed's Skunk Works Building Bigger Fusion Reactor
by pfdietz on Sunday July 21, 2019 @07:58AM
(#20490967)
Unfortunately, there is a lower limit set by the need to absorb neutrons. The blanket has to be roughly 1 meter thick.
One might be able to evade that if one could have a large number of tiny, or at least thin, reactors sharing a common blanket, much as the fuel rods of fission reactor share a common moderator. However, it's still likely to be inferior to a fission reactor in power density, as these tiny reactors would irradiate each other.
Beyond that, there's the need to confine the plasma to these very small reactors. Even in complete absence of plasma instability and turbulence, ions will scatter off each other and diffuse out and be lost. This classic diffusion takes time proportional to the square of the minimum reactor dimension / ion gyroradius.