News for hackers. Stuff that matters.
Re:Raspberry Pi 4 not working with some chargers by cesarb on Friday July 05, 2019 @12:51PM (#20363946)
> As far as I can tell, the spec could have been designed so that having so resistor at all would indicate a baseline cable.

Isn't that exactly how the spec is? AFAIK, a baseline cable has no resistor, the resistors are on the devices on either end. Only "electronic marked" cables have a resistor, and that's where the RPi4 fails: they shorted together the pin which has the configuration wire to the other end (where the device on the other end has one of its pair of resistors) with the pin which on a baseline cable has nothing at all, but which on a more advanced cable has a resistor connected to ground. So when there's no resistor at all (baseline cable) it works; when there's a resistor, the current flows through a wrong path and the voltage ends up in the range for a different kind of device.

Re:Raspberry Pi 4 not working with some chargers by amluto on Friday July 05, 2019 @06:06PM (#20366274)
Nope. A compliant baseline USB-A to C cable contains a resistor.