Either way it'd have to be legible without the need of a microscope or computers. Write the same text down in a few dozen vastly different languages, so you've got a modern day Rosetta Stone.
And of course, build it somewhere remote and seal it. Bonus points for a stable atmosphere, fill it with a heavy noble gas or make it a vacuum.
(I'm not well versed in any related sciences, I'm just sounding off some random ideas)
https://www.theatlantic.com/technology/archive/2017/01/human...
https://www.memory-of-mankind.com/how-is-information-kept-le...
> The geology of the mountain will allow the MOM archive to fully close itself by a natural phenomenon: the salt “flows” with a speed of 2 cm/year into any void. This will protect the archive from the greatest threat; man himself.
> The pressure which results from the weight of the mountain and a hypothetical ice shield of 5 km thickness is approximately a fifth of the burst pressure of the used materials.
>For the extreme longevity version of the Rosetta database, we have selected a new high density analog storage device as an alternative to the quick obsolescence and fast material decay rate of typical digital storage systems. This technology, developed by Los Alamos Laboratories and Norsam Technologies, can be thought of as a kind of next generation microfiche. However, as an analog storage system, it is far superior. A 2.8 inch diameter nickel disk can be etched at densities of 200,000 page images per disk, and the result is immune to water damage, able to withstand high temperatures, and unaffected by electromagnetic radiation. This makes it an ideal backup for a long-term text image archive. Also, since the encoding is a physical image (no 1's or 0's), there is no platform or format dependency, guaranteeing readability despite changes in digital operating systems, applications, and compression algorithms.
>Reading the disk requires a microscope, either optical or electron, depending on the density of encoding and could be combined with an Optical Character Recognition system to read the text back into digital formats relevant at the time of reading. We are keeping our encoding at a scale readable by a 1000X optical microscope, giving us a total disk storage capacity of around 30,000 pages of text.
I’ve been wondering lately how well you could do with a microfilm strip full of 2d barcodes prefixed by an optical copy of the relevant specifications.
Not really, those future people don't just come out of nowhere. It's a gradual, incremental change as there are still systems using tape storage the technology or formats are not lost but migrated.
Find a 3.5" floppy disk from 1995 with WordPerfect files on it and see how much effort it takes you to get the documents back. Now imagine 100 years have passed.
Similarly, I think what matters here is the higher-order redundancy. A single encoding that can be lost, is not straightforward to figure out, and holds the clue to a massive storage, isn't the most future proof decision; it's a single point of failure.
My understanding is that it doesn't matter. The data is embedded three dimensionally in glass. Assuming there was some small margin of glass around the patterned region, you could simply grind / polish off the scratches. Of course if you scratched it deep enough to destroy the data region then you'd be out of luck, but this can be made arbitrarily difficult.
Furthermore, you can arbitrarily scale error tolerance with error correcting encodings; data can be distributed, such that damage in one or a few areas is still available elsewhere, similar to RAID 5 and 6.
* Materials. You need something that can be manipulated or deformed at reasonable energy levels into two or more stable states to store data, then maintain that state for a useful lifetime without power. That's already a bit of a Goldilocks act, but it must also be non-reactive, not too brittle, not too expensive, etc.
* Media manufacture. Recording even a single layer at these feature sizes is a non-trivial challenge. As layers increase, yield drops exponentially - even before you consider how the layers interact.
* Read/write mechanisms. Focusing on a single layer on a moving medium, with nothing in the way, is also a challenge. Put other data-bearing layers in the way and it becomes much more difficult. Also, the "blast radius" for a single focus/alignment error becomes much larger, so you're going to need some serious error correction over and above what already exists for 2D.
* Transfer speeds. These are already problematic even at 10TB. 360TB without a corresponding increase in transfer speeds would be a nightmare.
A prototype involving a novel set of materials and/or mechanisms working once under ideal conditions is great. Science advances. Kudos for that. But that's only solving about one fifth of the problems that need to be solved to produce something of actual value in the market. You see a similar thing with battery technology. Everyone knows we need better batteries. There are always several companies claiming to have found the next breakthrough Almost invariably the new wonder material turns out to be a poor fit for real-world scale, economics, or conditions. Obviously we should keep trying, and keep learning, but nobody should get their hopes up too much too early.
TIL
https://etherealmind.com/network-dictionary-spinning-rust/
> Spinning Rust – term for conventional hard disk drives with motors and using ferrous-based platters for data storage. Probably derogatory now that Flash Drives are beginning to replace conventional drives.
So far the most viable "solution" is to store data in the cloud service like Backblaze or AWS S3, where it's someone else headache to maintain high enough duplication and swap the drives as they reach their EOL.
If you really need the lifespan of paper... http://ollydbg.de/Paperbak/
What if SSD memory gets scratched?
What if <any storage> gets <X mechanical damage>?
> What if <any storage> gets <X mechanical damage>?
It's more like "How much X damage can storage Y tolerate before losing Z amount of data?" You evaluate the different tech then you pick the best option.
Maybe some of this could be mitigated with logical techniques (e.g. make data redunant over 2 or 3 different parts of the disc, sacrificing capacity for durability), but it really depends on whether the process allows for this or completely borks out as soon as a scratch happens. They don't say anything about that and I think it's a pretty important aspect of any long-term storage solution.
More seriously, they don't talk about reading capabilities (retrieval speed etc). And what if it gets scratched? What is the error tolerance? At that density, a single speck of dust could have dramatic implications...
I hope this reaches industrial viability, because we desperately need a digital format that can approximate the lifespan of simple paper. At the moment we are chained to a maintenance nightmare of periodic hops between formats, with deadly consequences any time we miss a single jump.