News for hackers. Stuff that matters.
Re:Newly recovered Ground Zero photos show why you should ba... by tialaramex on Monday June 17, 2019 @05:45AM (#20201314)
The philosophy of just copying data makes sense, but your justification not so much.

> Drive interfaces change over time, and I have drives where there is no way to hook them up to a newer computer

20+ year old PC drives will have IDE interfaces, which you can of course get a USB adaptor for very cheaply and I have several laying about. Really old PCs or non-PC hardware (e.g. the Amstrad CPC 6128 in the 1980s had an after market hard disk option) will need a different adaptor, but it's still just not that hard, and certainly shouldn't be categorised as "there is no way".

> For example, good luck trying to read a 5.25" floppy. You'll need to build your own hardware and write your own device driver to do it.

You can easily buy refurbished 5.25" drives, and you can convert the data signal (which for a PC was basically the same as for 3.5" drives, but with a different physical connector) to USB. They're bulky and they need a lot of power at 12 volts, which is probably why off-the-shelf 5.25" USB floppy drives aren't a thing unlike for 3.5", but it won't require that you "build your own hardware" in any real sense.

You're only going to need to go writing device drivers if you've got some crazy disk format, and it'd have to be pretty crazy because the Catweasel already covered a lot of that territory (a Catweasel was a thing for Amigans, whose disks are a crazy format, to let them use PC disk drives to read their disks years ago, the last ones have an FPGA in them so that the uploadable firmware can decide how to control the drive).

Re:Newly recovered Ground Zero photos show why you should ba... by WalterBright on Monday June 17, 2019 @04:28PM (#20206998)
I have several 5.25 drives laying around. The connectors still fit on them to the motherboard, but the BIOS no longer recognizes them, though the BIOS will recognize 3.5 floppy drives.

I can't find any device that connects the drive with the computer that doesn't require writing a device driver.

It's not a crazy disk format, it's DOS format.

As for hard disk drive interfaces, I have a couple off the shelf USB interfaces to IDE drives. The connectors fit, but they don't recognize the older drives.

Re:Newly recovered Ground Zero photos show why you should ba... by tialaramex on Tuesday June 18, 2019 @05:43AM (#20211063)
I can't speak to what's up with the BIOS versus 5.25" drives, beyond to say that I'm confident somebody out there has this working without writing device drivers.

For the USB to IDE thing, my guess would be that the USB interfaces you tried want to do some newer incarnation of ATA than the drive supports and so they can't communicate, at the extreme that could be LBA48 (48-bit logical block addressing, which is from this century and so obviously isn't going to work on say a 20 year old hard disk) but it could even be DMA, which was optional in early ATA specifications and might have been skipped by cheap manufacturers back in the day.

I don't think logical addressing itself was ever optional, but I guess it's possible that a _really_ old IDE drive might not implement it and yet work anyway in DOS which didn't originally use LBA mode. Doing CHS mode really would be asking a lot, compared to PIO (the alternative to DMA) which really a competent implementation of that USB adaptor ought to be able to do, slowly like a real PC.

Re:Newly recovered Ground Zero photos show why you should ba... by WalterBright on Tuesday June 18, 2019 @03:13PM (#20217156)
> I'm confident somebody out there has this working without writing device drivers.

I google search for it now and then, and come up with nothing that can be simply installed and used.