Re:A Field Guide to Power Transmission Lines
by scrumper on Tuesday June 11, 2019 @02:36PM
(#20158226)
Thanks. Had to do some reading to understand that, made more sense once I learned the phase-neutral voltage was the supply voltage / sqrt(3) not just divided by 3. Then I started reading about wye configurations and now it's time to stop.
There's a marvelous video somewhere on YouTube showing someone splicing a _live_ conductor while dangling from a helicopter. Can't find it now. Yours still gave me the willies though! Horrid big deadly snakey things. Ugh.
Re:A Field Guide to Power Transmission Lines
by camtarn on Tuesday June 11, 2019 @09:14PM
(#20160930)
This one, I reckon.
Re:A Field Guide to Power Transmission Lines
by scrumper on Wednesday June 12, 2019 @04:08PM
(#20168749)
That's the one.
Re:A Field Guide to Power Transmission Lines
by jacquesm on Tuesday June 11, 2019 @08:00PM
(#20160616)
"Pick up that cable, will you"
"Feel anything?"
"No?"
"Ok, then the other one is the live high tension one..."
Re:A Field Guide to Power Transmission Lines
by new4thaccount on Tuesday June 11, 2019 @10:20PM
(#20161207)
The complex imaginary channel on YouTube for the power PE test covers when to use sqrt(3) and starts off very basic.
It’s important to remember that everything is contained in equipment made by companies that I trust (Rittal and Eaton and APC). Also, everything is grounded (the doors to the racks, the racks to the cable ladder, and the cable ladder to a special ground), which is in addition to the equipment ground. Finally, I know (and work with) the people who build and maintain the infrastructure.
As for the thick cable, if you’re up to it, here’s a video showing a process for joining the cables together: https://youtu.be/EvWx-VKVvmo
The thing to note, is the layers of copper ground that are wrapped around each conductor line, as well as the bundle itself.