News for hackers. Stuff that matters.
Re:Wireguard-docs: Setup, usage, configuration, and a full e... by StavrosK on Wednesday May 29, 2019 @05:56AM (#20038363)
If you give me some sample config I can add it to my howto here: https://www.stavros.io/posts/how-to-configure-wireguard/
Re:Wireguard-docs: Setup, usage, configuration, and a full e... by tgragnato on Wednesday May 29, 2019 @08:25AM (#20039228)
I based my configuration on yours. You just need to add another 'Address = <IPv6>' (client and server), and add ip6tables.

The address is going to be static: I'm not aware of a way to simulate privacy extensions with Wireguard. A workaround is to assign ULAs and apply NAT.

Re:Wireguard-docs: Setup, usage, configuration, and a full e... by StavrosK on Wednesday May 29, 2019 @08:39AM (#20039376)
I see, thank you. Unfortunately I don't have IPv6 on my network and don't know the IPv6 local addresses and ip6tables config, if you could give me the actual config you used I'd appreciate it, especially if it works with both IPv4 and IPv6 together.
Re:Wireguard-docs: Setup, usage, configuration, and a full e... by tgragnato on Wednesday May 29, 2019 @08:55AM (#20039542)
Sure

------------------

[Interface] Address = 172.16.31.1/24 Address = 2001:__::1/64 PrivateKey = __ ListenPort = 443

[Peer] PublicKey = __ PresharedKey = __ AllowedIPs = 172.16.31.2/32, 2001:__::2/128

[Peer] PublicKey = __ PresharedKey = __ AllowedIPs = 172.16.31.3/32, 2001:__::3/128

[...]

------------------

PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i %i -j ACCEPT; ip6tables -A FORWARD -o %i -j ACCEPT PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i %i -j ACCEPT; ip6tables -D FORWARD -o %i -j ACCEPT

------------------

[Interface] Address = 172.16.31.2/24 Address = 2001:__::2/64 PrivateKey = __ DNS = 172.16.31.1, 2001:__::1 [Peer] PublicKey = __ PresharedKey = __ AllowedIPs = 0.0.0.0/0, ::/0 Endpoint = <server_ip>:443 PersistentKeepalive = 25

------------------

Re:Wireguard-docs: Setup, usage, configuration, and a full e... by StavrosK on Wednesday May 29, 2019 @09:01AM (#20039585)
This is extremely helpful, thanks!