Re:Nasa Set to Demonstrate X-Ray Communications in Space
by xioxox on Saturday May 25, 2019 @01:19PM
(#20010131)
In X-ray astronomy we often use Wolter Type 1 optics based on grazing incidence. These can be made with various techniques depending on the spatial accuracy (point spread function) required, e.g. foils for low accuracy or even stacked silicon wafers planned for the Athena telescope. The effective area of the telescope is smaller than the physical mirror size as everything has to be reflected at grazing incidence. We often use CCDs to detect the X-rays.
Re:Nasa Set to Demonstrate X-Ray Communications in Space
by jbay808 on Saturday May 25, 2019 @10:46AM
(#20009341)
Even to x-rays, smooth surfaces become reflective at grazing incidence, so you can make mirrors that are constructed on that principle. Not simple to do, but not impossible either.
Re:Nasa Set to Demonstrate X-Ray Communications in Space
by madengr on Saturday May 25, 2019 @10:55AM
(#20009392)
The gain falls off as the RMS surface roughness becomes a fraction of a wavelength; see figure 1 here:
https://arxiv.org/pdf/1007.4600.pdf
So it would be interesting to see how that effects it. I suppose a crystal fractured along the lattice for an atomically smooth surface.
At X-rays, I don’t know how you would focus it as the roughness is in on a molecular scale. So going to higher frequencies has its limits.
I don’t know what the equivalent gain of these large, optical telescopes are, but they seem to suffer from the same problems.
The plasma penetration must the the real objective. You can get thru the plasma with standard RF, it just takes lots more power, or lower data rate, but a low reset beacon is feasible, just not voice comms.