News for hackers. Stuff that matters.
Re:Building a home NAS on a shoestring budget with the Rock6... by pdelbarba on Monday May 20, 2019 @10:03PM (#19967068)
Check the allowable voltage input ranges for each and if they have overlap just buy a big power brick (like a laptop charger), cut the ends off of each of the supplied wall warts and solder+shrinkwrap them all together into a nice neat harness. This has the added benefit of saving a tiny bit of power assuming you get a decent main supply.

Tip: thread the shrinkwrap first before soldering. This will save you much swearing.

Re:Building a home NAS on a shoestring budget with the Rock6... by Scoundreller on Tuesday May 21, 2019 @01:16AM (#19967705)
You can also find barrel splitters. I use one so that my 12V router and 12V modem both run off 1 wall-wart.

Look to be common for security cameras.

Like so: https://www.ebay.ca/itm/113713154440

Re:Building a home NAS on a shoestring budget with the Rock6... by voltagex_ on Tuesday May 21, 2019 @02:12AM (#19967920)
Did you do any testing to figure out how many amps you're drawing from the single wall wart? Although, modem/routers in normal usage are pretty low draw.