According to this article[1], the intended purpose was to restore the back-force needed to put the airplane in a stall, as the effect of the new engines was to make the control feel lighter at high AofA. The article also discusses the certification requirements with regard to acceptable handling characteristics.
FWIW, Boeing CEO Dennis Muilenburg is quoted in [2] as saying that "When you take a look at the original design of the MCAS system. I think in some cases, in the media, it has been reported or described as an anti-stall system, which it is not. It's a system that's designed to provide handling qualities for the pilot that meet pilot preferences.
"We want the airplane to behave in the air similar to the previous generation of 737s. That's the preferred pilot feel for the airplane, and MCAS is designed to provide those kinds of handling qualities at a high angle of attack."
Of course, the elephant in the room not being mentioned here is whether Boeing's primary motive for replicating the handling characteristics of earlier versions of 737s was an overriding concern with avoiding pilot training.
[1] https://leehamnews.com/2019/02/15/bjorns-corner-pitch-stabil...
[2] https://www.businessinsider.com/boeings-ceo-on-why-737-max-p...
Boeing 737 MAX without MCAS violates that requirement (caused by the lift generated by large engine nacelles in front of the wings). MCAS is indeed designed to restore that required back-force. Back-force that is required to prevent stalls.
I suppose one could debate whether the stall prevention effect of MCAS is direct or indirect. But I don't think it's debatable that it is designed to comply with a certification requirement that's intended to help prevent stalls.
Boeing may be denying that MCAS has a stall prevention purpose only because to say so might put it in the critical systems category, requiring additional training. If so, this would apply as much to the fix as it does to the original version. To acknowledge that it has a stall prevention function might require an additional AofA sensor as well as additional training.
MCAS's only observable intervention is to push the nose down to prevent stall, which means it is by definition anti-stall.
Boeing says MCAS is an acronym for "Maneuvering Characteristics Augmentation System", but a better name for MCAS is "Machine Controlled Anti Stall".
https://en.wikipedia.org/wiki/Maneuvering_Characteristics_Au...