France did this in the 1970s. They hired engineers to design them 1 single kind of plant that was cheap, safe and would last a long time and then they pumped them out by the dozens. Every plant was the same as every other plant, so construction crews got good at it, part manufacturers could tool up for big production runs and lower per-part cost, and government inspection was drastically simplified because everything on the project was as stock as possible and the original design had already been approved. Now France's problem is it has too much electricity, as it over-estimated how much energy demands would ramp up going into the 21st century, and so now sells excess wattage to Germany.
In the end it needs to either beat Wind or Natural Gas. Meanwhile grid storage prices keep dropping which may soon start undercutting Natural Gas.
Wind is somewhat bad as base load plant as there are serious lulls when wind is relatively globally low.
Wind competes in exactly the same niche as the price is low though with some additional downsides. As you build more of them there is less utility in base load power as you end up producing wasted electricity production ever more frequently.
PS: Hydroelectric is generally the ideal peaking power plant as it’s cheap, the downside is you can’t build many if them.
What ever happened to the offshore hydroelectric turbines we were supposed to get? I think is was 15-20 years ago they were being touted as one of the next big power systems.
Um, that doesn't exactly sound like a "problem", especially since Germany gave up on nuclear due to nuclear fears, and still has a lot of coal plants.
The important parts not on picture:
* Small reactors units, built on a factory and delivered by truck.
* Reactor units are unified, so the economies of scale kick in.
* Full passive cooling, sufficient when all external power is off.
* Containment vessels for the reactor units, so the danger of any leaks is greatly limited.
What makes me wonder is the complete absence of a smokestack to siphon off any excessive second-circuit steam. The artist also did not draw an electric switching / transformer yard and a power line. Do they plan electricity egress by some underground superconductive cable? (Would be cool, but not cheap; currently only makes sense in very dense urban environments.)
Just because the architectural facade is 'fancy' does not mean the internal plumbing is.
I want truly cheap nuclear that sits in unobtrusive cheap concrete boxes like the old Bell telephone exchange buildings.