News for hackers. Stuff that matters.
Re:Software, the Tough Tomato Principle, and the Great Weird... by bungie4 on Tuesday April 30, 2019 @11:03AM (#19788556)
When you're a hammer, everything looks like a nail principle. Come on admit, you've hammered in a screw before.

Good easy read though.

Re:Software, the Tough Tomato Principle, and the Great Weird... by FreeFull on Tuesday April 30, 2019 @11:56AM (#19789083)
I'm reading it more as "If the only tool everyone has is hammers, everything will be done with nails"
Re:Software, the Tough Tomato Principle, and the Great Weird... by beat on Tuesday April 30, 2019 @03:28PM (#19791087)
And screws will be refined to lose those hard-to-hammer threads and that unreliable taper.
Re:Software, the Tough Tomato Principle, and the Great Weird... by stcredzero on Tuesday April 30, 2019 @02:52PM (#19790776)
Come on admit, you've hammered in a screw before

Nope. Never. I take "everything" to be an exaggeration for effect. I've only hammered in peg-like or nail-like objects.

I will totally admit to pliering in a screw, however.

Re:Software, the Tough Tomato Principle, and the Great Weird... by mc32 on Tuesday April 30, 2019 @03:00PM (#19790844)
I do, sometimes, to get them started specially into hard wood (not necessarily hardwood), from there a driver will take over.
Re:Software, the Tough Tomato Principle, and the Great Weird... by Stratoscope on Tuesday April 30, 2019 @03:57PM (#19791336)
Drill a pilot hole of the correct size (as wide as the screw shaft without the threads). You will have a much easier time, and you won't split the wood.

https://www.ezwoodshop.com/blog/pilot-hole/perfect-pilot-hol...

Re:Software, the Tough Tomato Principle, and the Great Weird... by mc32 on Tuesday April 30, 2019 @04:11PM (#19791468)
Of course, I meant if you don’t have those things at your disposal at a given time.
Re:Software, the Tough Tomato Principle, and the Great Weird... by stcredzero on Tuesday April 30, 2019 @05:51PM (#19792368)
To start a screw, I've sometimes dug out a divot with the screw or a knife. That way, at least I've removed a little material that might spread apart the grain near the surface.