Re:ISPs in AU and NZ start censoring the internet without le...
by int_19h on Sunday March 24, 2019 @02:08AM
(#19474723)
It's more substance than usual for sure. My point was that it's still not going to prevent the next terrorist from doing more or less the same thing. The only way to make this kind of regulation sensible is to stop chasing implementation details, and have some standard testing protocol for actual performance (e.g. rate of fire), then set limits on that.
Magazine capacity limits are relevant in principle, but the problem is enforcement - they're just too simple to effectively regulate. Even defining what a limit is can be hard, given that it's a box with a spring, so the limit inherently depends on what cartridges can fit and feed. As Canada has found out, this means that a 5-round magazine can be a 15-round magazine sometimes. But even when you have a clear definition that accounts for all such shenanigans, good luck enforcing it when one can make high-cap mag bodies by cutting legal ones, and duck taping them together. Again, it's a metal box with a spring, not even curved in many calibers; most complicated parts are the follower and the feed lips, and those are the same regardless of capacity.
I'd still look at their definitions first, though, because in most countries (and US states) that limit magazine capacity, a full-sized magazine that is blocked internally by some kind of pin is perfectly legal, and yet that pin takes about 50 seconds to remove without breaking the magazine. There's a lot more security theater about gun laws in most places than people realize.
Magazine capacity limits are relevant in principle, but the problem is enforcement - they're just too simple to effectively regulate. Even defining what a limit is can be hard, given that it's a box with a spring, so the limit inherently depends on what cartridges can fit and feed. As Canada has found out, this means that a 5-round magazine can be a 15-round magazine sometimes. But even when you have a clear definition that accounts for all such shenanigans, good luck enforcing it when one can make high-cap mag bodies by cutting legal ones, and duck taping them together. Again, it's a metal box with a spring, not even curved in many calibers; most complicated parts are the follower and the feed lips, and those are the same regardless of capacity.
I'd still look at their definitions first, though, because in most countries (and US states) that limit magazine capacity, a full-sized magazine that is blocked internally by some kind of pin is perfectly legal, and yet that pin takes about 50 seconds to remove without breaking the magazine. There's a lot more security theater about gun laws in most places than people realize.