News for hackers. Stuff that matters.
Re:Beeps and melodies in two-way radio by zackmorris on Saturday March 23, 2019 @01:07PM (#19471267)
This is the most concise explanation of Gaussian peak interpolation from the article that I can find. Unfortunately it's a pdf, but it does have a full example:

http://www.add.ece.ufl.edu/4511/references/ImprovingFFTResol...

    RFFT_SIZE = 256
    magAddr: points to array of FFT magnitude results
    sample_freq = 8000Hz
    TI_FFT(): TI optimized function to calculate FFT
    maxidx_SP_RV_2(): TI optimized function to find maximum value in array
    
    TI_FFT(); //perform TI FFT analysis.
    int max_bin = maxidx_SP_RV_2(magAddr, RFFT_SIZE>>1); //find max bin
    float freq_rez = (float)sample_freq/RFFT_SIZE; //calculate frequency resolution
    float inter_bin = max_bin + log(magAddr[max_bin+1]/magAddr[max_bin-1])*0.5
        /log(magAddr[max_bin]*magAddr[max_bin]/(magAddr[max_bin+1]*magAddr[max_bin-1]));
        //calculate the intermittent bin on continuous spectrum using GI
    freq = (unsigned)(freq_rez*inter_bin); //calculate max input frequency
I believe that the above is C code, so the array indices are 0-based.

I can't find anything on TI_FFT except a bunch of PowerPoints, so you'll probably want to use a better documented FFT function:

https://www.google.com/search?q=TI_FFT&tbs=li:1

Here is the maxidx_SP_RV_2() function:

http://read.pudn.com/downloads543/sourcecode/embedded/224236...

There are no comments on this comment yet.