News for hackers. Stuff that matters.
Re:Teenager builds his own Lego prosthetic arms by jandrese on Friday February 08, 2019 @02:14PM (#19117662)
> After graduating from university, he wants to create affordable prosthetic solutions for people who need them.

Builds them out of Lego.

Hmm.

But seriously, this is super cool. Prosthetics are usually ultra-expensive because they get the double whammy of being bespoke and medical devices. There's a real opportunity for the hacker community to do a lot of good here.

Re:Teenager builds his own Lego prosthetic arms by cr0sh on Friday February 08, 2019 @04:15PM (#19118745)
I've recently found that the price of Lego - at least on the used/second-hand market - has fallen, depending on what you are looking for.

Complete sets are still hella-expensive - especially vintage ones. Certain custom models can also be very expensive. Lego Mindstorms of the past two generations (NXT and EV3) are also still up there in price.

But bulk Mindstorms, Technic and Expert Builder are all still fairly cheap (just stay away from pneumatics - that stuff is still pricey for some reason).

I have found the Mindstorms RCX 1.0, 1.5, and 2.0 (aka - yellow programmable brick) are all fairly cheap. The touch and light sensors aren't too expensive, and the going price for the PB is around $30.00 USD. Rotation sensors can be up there sometimes, and the temperature sensor is hard to find and expensive. Motors are cheap though (the 9 volt block ones) - most can be had for around $15.00 each.

Bulk parts are similarly low cost. Even the NXT and EV3 motors and sensors are fairly inexpensive (not as cheap as the older RCX, but not crazy). Since they use standard interfaces and connections, they can be easily controlled using a Raspberry Pi or Arduino. The RCX takes a bit more work (you have to use an h-bridge for each motor, and sensors require an ADC; easy on the Arduino, but you need something external for the Pi).

The various Mindstorms "Vision Command" and similar cameras are also fairly cheap; they aren't anything special - very low-res (352x488 IIRC) web cameras in a Lego enclosure. But you can get them to work with Linux (you have to preload the V4L1 library before executing a program like cheese or whatnot) - this used to not be the case (no driver existed about 8 or so years ago).

But yeah - if you're ok with hitting the second-hand market via Ebay or garage sales, you'll find it's now fairly cheap (again, staying away from things like the latest Mindstorms).

Oh! I also found that the Lego Dacta Control Lab (9751) interface can also be found cheaply - you can get 'em for $40-50 USD; they work with all the old 9V sensors and motors for the RCX. I've read that you can use a USB to DB9 serial port converter with them, and there is a ton of 3rd party libraries out there for control (I found ones in C, C#, Python, and Java).

Re:Teenager builds his own Lego prosthetic arms by jtolmar on Friday February 08, 2019 @10:32PM (#19120520)
> pneumatics - that stuff is still pricey for some reason

To hazard a guess, Lego's pneumatic sets tend to use just a couple pistons, while hobbyists buying the stuff want to do entire pneumatic-centric builds with many of them. Also the hoses break more often than other pieces.

Re:Teenager builds his own Lego prosthetic arms by _mrmnmly on Friday February 08, 2019 @04:21PM (#19118809)
ah vintage ones.. Ice Planet 2002 serie, one day I'll complete you ;)

but exactly, when you spent decent amount of time at websites like bricklink you can complete sets for a fairly lower price than usual.

It's always a good idea to check the local online market platforms as well.

Re:Teenager builds his own Lego prosthetic arms by benj111 on Friday February 08, 2019 @04:24PM (#19118836)
2002 isn't vintage. Now get off my lawn.

Edit: It isn't from 2002 its from 1993/94 [1], I'll buy some cookies, then get off my lawn :)

[1] https://lego.fandom.com/wiki/Ice_Planet_2002

Re:Teenager builds his own Lego prosthetic arms by quickthrower2 on Friday February 08, 2019 @11:36PM (#19120760)
1993 isn’t vintage... ok this could go on and on!
Re:Teenager builds his own Lego prosthetic arms by benj111 on Saturday February 09, 2019 @11:11AM (#19122991)
Reading around, vintage seems to be pinned at about 25 - 30 years, so it is on the cusp.

I'll get off your lawn now.

Re:Teenager builds his own Lego prosthetic arms by gugagore on Friday February 08, 2019 @05:49PM (#19119431)
You need an h-bridge for the NXT and EV3 motors too.

Perhaps you're thinking of some of the power functions motors?

Re:Teenager builds his own Lego prosthetic arms by todayiamme on Saturday February 09, 2019 @02:05AM (#19121156)
Hey do you have an email that I can reach you at?
Re:Teenager builds his own Lego prosthetic arms by delecti on Friday February 08, 2019 @05:01PM (#19119112)
In a kit, LEGO pieces average about $0.10 each depending on the specific kit. Even a Mindstorms set (which this seems based off of) would only be a couple hundred dollars. Not bad for a customizable and reusable prototype replacement for a prosthetic.
Re:Teenager builds his own Lego prosthetic arms by excalibur on Friday February 08, 2019 @02:25PM (#19117759)
> > affordable

> Builds them out of Lego.

> Hmm.

Perhaps he should use Mega Bloks instead.

Re:Teenager builds his own Lego prosthetic arms by MiddleEndian on Friday February 08, 2019 @03:05PM (#19118139)
Not if he wants his arm to stay together!
Re:Teenager builds his own Lego prosthetic arms by excalibur on Friday February 08, 2019 @04:11PM (#19118705)
I'm assuming he's using the Kragle.
Re:Teenager builds his own Lego prosthetic arms by bussierem on Friday February 08, 2019 @02:32PM (#19117818)
Looks like the hacker community is already on it! :)

https://medium.com/@ATN_Events/accessible-tech-in-employment...

Re:Teenager builds his own Lego prosthetic arms by opencl on Friday February 08, 2019 @05:22PM (#19119242)
There are some open source designs for cheap 3D printed prosthetics and a volunteer network to build them for people.

http://enablingthefuture.org/

Re:Teenager builds his own Lego prosthetic arms by sephoric on Friday February 08, 2019 @04:48PM (#19119007)
The legos he used here look like a total of $50 second hand.