I don't have a database, but I can say that most (but not all) filament designs are terrible for flicker--ours is an exception. Philips products seem to have gotten worse in quality over time, probably to remain competitive, but they are better than the worst. Ikea's stuff is pretty good overall. I don't have a consistent recommendation for low-flicker general lighting right now, as every brand has good and bad products.
And, yeah, I tried that Soraa healthy bulb, and it was shockingly bad, given how it was advertised. Even the regular Soraa bulbs were disappointingly flickery, though less so. Also, just looking at the pattern it makes on my phone's rolling shutter, the wave is quite saw-toothed, and I wonder if that makes it worse? I have some Ikea candelabra bulbs which were always pleasant, and I was surprised to see they also left quite a visible flicker pattern on my phone, though much more sinusoidal/smoother.
It's a shame about the flicker in the Soraa bulbs, since the colors really did seem nice.
What's interesting is that the bulb seems to have a nice build quality (from the outside, I didn't open it) and is quite heavy. I suspect they are putting a BIG heatsink in there, as violet pump phosphors tend to degrade quickly.
The other thing that irks me about this product is the "zero blue" messaging. Yes, I can confirm the spectrum looks like what they are advertising, with a peak around 415nm, almost nothing between 440-490nm, and then all the rest of the colors from green to red.
But, green light is just as bad as blue for sleep! The ipRGCs are sensitive to both blue and green (up to around 600nm) This bulb has a lot of green, more than a lot of other light sources. It also has a very unpleasant greenish color (IMO) and low-ish CRI, around 78 on the bulb I tested.
Is it better than a normal 600lm bulb for sleep? Yes. Is it novel? Yes. Is it good in practice? I don't think so.
what does that mean? Duty cycle is 50%, frequency at something Hz? Not being snarky - curious whether there is some kind of standard that your tool compares against.
A duty cycle 50% (or any percent really) isn't bad in itself, it's the frequency that is the culprit. Too low PWM freq and you'll notice it.
Two factors are often used to describe flicker for lighting:
- Modulation %, a.k.a. % Flicker [The height or modulation of the waveform, formula is 100% * (A - B) / (A + B)]
- Frequency [self-explanatory]
Flicker Index is also used (refer to [1] page 7 for more info) but rarely.
Duty cycle is not considered relevant, as you mentioned.
Some tools designed to measure lighting, such as my UPRtek CV600 [2], spit out % flicker, frequency, and flicker index, in addition to a bunch of spectrophotometry metrics. It's also pretty easy to calculate the modulation % with an oscilloscope and photodiode, it's just Vp-p / Vmax.
IEEE 1789 [0][1] roughly says that the higher the flicker frequency, the more acceptable it is to have a high modulation %. If you look at the graphic on [1] page 18, you can see this relationship. The white area is considered unsafe, the yellow area is "low-risk", and the green area is "safe." I don't 100% agree with this personally, as most incandescent lighting, with around 6-11% flicker at 100-120 Hz, would fall into the unsafe or low-risk category. But the Soraa product is definitely in the unsafe category.
For reference, I plotted my product (Bedtime Bulb) against an incandescent A19, Lighting Science's Goodnight A19, and Soraa's Healthy A19 on an IEEE 1789 graphic [3] with a Python tool I'm developing, Beautiful Flicker [4]. You can see that this incandescent, measured around 10%, is on the border between unsafe and low-risk by this standard.
Hope this helps!
[0] IEEE 1789: A new standard for evaluating flickering LEDs?: https://www.dial.de/en/blog/article/ieee-1789-a-new-standard...
[1] Flicker: Understanding the New Recommended Practice (PDF) https://www.energy.gov/sites/prod/files/2015/05/f22/miller%2...
[2] UPRtek CV600 https://www.uprtek.com/en/product/SPECTRAL-COLOR-METER/CV600...
[3] IEEE 1789 Graphic Comparing 4 Light Sources https://github.com/yeutterg/beautiful-flicker/blob/master/ou...
[4] Beautiful Flicker https://github.com/yeutterg/beautiful-flicker
> “I am on a mission to make lighting healthy. That's why I made Bedtime Bulb: https://bedtimebulb.com/ It has the lowest flicker I've ever seen in a bulb form factor—even less than those claiming to be "flicker-free."”
In addition to that, a few other database sites that test for flicker were mentioned here³.
――――――
¹ — https://news.ycombinator.com/item?id=18644590
² — https://news.ycombinator.com/item?id=18650624
³ — https://news.ycombinator.com/item?id=18646409