Re:How I use my Raspberry Pis to help me work on with my sid...
by thinkmassive on Friday January 18, 2019 @10:09AM
(#18939778)
> 2. I can plug RPi to it and I can plugin a charger in 2i. When the main power cuts off, It'll instantly switch over to battery with 0 downtime. I think this is called passthrough charging)
This alone is a killer feature that’s far less common than I expected before I started searching for it. Most power banks cut off output while they’re charging, and many require physically re-plugging the device to start powering it again.
I ended up acquiring a PiJuice for this functionality alone.
Re:How I use my Raspberry Pis to help me work on with my sid...
by clanrebornyes on Friday January 18, 2019 @05:25AM
(#18938327)
How many hours it lasts?
Re:How I use my Raspberry Pis to help me work on with my sid...
by ishanjain28 on Friday January 18, 2019 @01:42PM
(#18941658)
I have never measured it. At worst the main power has gone down for a 2-3 hours and it lasted at least as much. I don't have a USB power meter to measure the power taken by the Rpi so I can not give you an exact number but I would guess it to be at least around 5-10 hours if not more.
Edit: Someone linked pijuice project. I went to their website and according to them, Their 10k mah version lasts 24+ hours
> Onboard 1820 mAh off the shelf Lipo / LiIon battery for ~4 to 6 hours in constant use! (with support for larger Lipo Battery of 5000 or 10,000 mAH+ to last up to 24 hrs +)
https://uk.pi-supply.com/products/pijuice-standard
So, I would say 2i would probably last about the same?
1. It's dirt cheap than any other solution I found($15, I use 10k mah version)
2. I can plug RPi to it and I can plugin a charger in 2i. When the main power cuts off, It'll instantly switch over to battery with 0 downtime. I think this is called passthrough charging)
3. It can provide 2.5 or 3.5 amps(not sure about exact value) output
4. It has two ports