News for hackers. Stuff that matters.
Re:Cool stuff you can do with netcat by roadnottaken on Friday November 05, 2010 @11:57AM (#1873623)
Anyone want to give a few examples of cool things they actually do with netcat?
Re:Cool stuff you can do with netcat by yan on Friday November 05, 2010 @12:03PM (#1873642)
I use it for:

- creating quick and dirty proxies (nc > fifo > nc). (edit: you can also bridge udp->tcp this way, which makes proxying UDP through an ssh tunnel possible)

- making simple GET requests (printf "GET / HTTP/1.0\r\nHost: www\r\n\r\n" | nc host 80, or save the full request and pipe that to netcat)

- checking if a port is open (nc -p 8080 host, tends to be quicker than nmap and less to type)

- dumb file transfers ('nc -l port > file' on one machine, 'file | nc host2 port') on another (or using tar for directories). Usually I use ssh/scp, but sometimes that nc trick works just fine..

Re:Cool stuff you can do with netcat by russellsilva on Friday November 05, 2010 @01:13PM (#1873971)
I use netcat to simulate a network connectivity failures.

For instance, if server:port 1000 is the normal host and port my application would connect to, I set up a forward from port 2000:

    nc -L server:1000 2000
then run my application to connect to localhost:2000

    my_application --server=localhost --port=2000
Now my application is connected to localhost:2000, which is forwarded to server:1000 through netcat. To simulate a network connectivity failure I just kill netcat.
Re:Cool stuff you can do with netcat by 1amzave on Friday November 05, 2010 @01:12PM (#1873965)
A few days ago I was wondering if the link between two remote hosts was 100Mbps or 1Gbps, and didn't have root access to run ethtool (sidenote: is there an easier way for an unprivileged user to determine this?), so out came netcat and dd:

  host1$ dd if=/dev/zero | nc host2 5432

  host2$ nc -l 5432 > /dev/null
Let it run for a moment and then ctrl-C'd host1; the stats dd printed on exit gave a pretty clear answer to my question.
Re:Cool stuff you can do with netcat by JoachimSchipper on Friday November 05, 2010 @05:46PM (#1875066)
For an easier way, consider ifconfig. You can run it as non-root, you know - you just won't be able to change anything.
Re:Cool stuff you can do with netcat by justinbach on Friday November 05, 2010 @02:52PM (#1874355)
I spent a few summers at the National Institutes of Health building a DICOM (Digital Imaging and Communications in Medicine) suite for the storage and retrieval of Nuclear Medicine and CT images. It consisted of a client and a server and was built completely in IDL. It used Netcat both to listen/respond on the server side and to issue queries and retrieve (meta)data on the client side.

Like others in this thread, I too received a few bureaucratic slaps on the wrist for doing unauthorized port-scanning during the development process (we were trying to find a set of suitable unused ports for the package). Apparently it was worth the trouble, though--it was nearly 10 years ago that I built the package, and the software's still in use!

Re:Cool stuff you can do with netcat by _b8r0 on Friday November 05, 2010 @01:08PM (#1873945)
This is pretty much the fastest way I've found to clone a disk over a network. To clone from one host's /dev/sda to another host's /dev/sda in Linux, try this.

On the target host, run the following:

nc -l 31337 | bzip2 -d | dd bs=16M of=/dev/sda

On the host you're copying from, do this:

dd bs=16M if=/dev/sda | bzip2 -c |nc dest.host.com 31337

Bear in mind that this isn't secure (everything goes over the wire in clear and there's no auth) and that for best results you should only do this from a live cd (if you're dd'ing from or to the live drive you've mounted there's a high risk that you'll change the filesystem mid-copy, depending on source FS used, this could corrupt the destination).

Re:Cool stuff you can do with netcat by 1337p337 on Saturday November 06, 2010 @02:26AM (#1876328)
As a method of obscuring the data slightly (although really it doesn't add much), I sometimes like to add "conv=swab" to the dd. But for the CPU that's being spent on the bzip2, you could do it slightly more easily with a single command on one machine:

    dd bs=16M if=/dev/sda | ssh dest.host.com 'bzip2 -d >/dev/sda'
Of course, that presupposes a running sshd on dest.host.com. You could secure it from being observed (although not from being interfered with) under Linux using loopback devices:

    ## On the destination machine:
    LOD=`losetup -f`
    losetup -e aes $LOD /dev/sda
    # You'll be prompted for a password for the encryption.
    nc -l 31337 | bzip2 -d | dd bs=16M of=$LOD

    ## On the source machine:
    LOD=`losetup -f`
    losetup -e aes $LOD /dev/sda
    # You'll be prompted for a password; use the same one.
    dd bs=16M if=$LOD | bzip2 -c |nc dest.host.com 31337
Most people just use encrypted loopback devices for things like disk encryption, but losetup (like netcat) has so many other fun potential applications.

(Edited twice due to formatting sadness.)

Re:Cool stuff you can do with netcat by _b8r0 on Saturday November 06, 2010 @05:01AM (#1876505)
That second one's really interesting. I've tried the SSH route and while it works (and works well) it really knocks up the time to send an image over the wire.

We've used this for forensic imaging in the past and have relied upon digital signatures as integrity checks. It's not great I know, but it's the best way to get disk images from a big server onto a NAS (when you can't plug the NAS into the server).

Re:Cool stuff you can do with netcat by 1337p337 on Saturday November 06, 2010 @05:25AM (#1876526)
The second one is way more fun, using the real device as the plaintext and the loopback as the cyphered version.

Have you tried using the -C (compression) option to ssh instead of the bzip2 pipe? I don't often have occasion to do this sort of thing, so if you've tried that already, it would be interesting to know relative timing. pbzip2 ( compression.ca/pbzip2/ ) might be helpful sometimes, but I don't suspect that it's carried on most live CDs (unless you guys are rolling your own) and the CPU probably isn't the bottleneck anyway.

9P2000 has recently made it into the Linux kernel and it gets way better throughput than NFS, but (and I'm not too familiar with NAS hardware or software, so I may be saying something foolish) I don't suspect it's a supported protocol on those things. Either way, I also don't suspect that adding the overhead of an FS protocol could be helpful in cases where netcat would do, but it's a nice tool to have in the box.

Re:Cool stuff you can do with netcat by _b8r0 on Saturday November 06, 2010 @06:52AM (#1876626)
I haven't tried -C on SSH, but I'll make a note to try it next time I get the chance. We use QNAP NAS so we're more or less stuck to specific kernel versions, but the userland is fairly complete (as you have basically got a ton of disk space for userland apps!)
Re:Cool stuff you can do with netcat by dacort on Friday November 05, 2010 @04:24PM (#1874744)
Poor man's remote command execution (when compiled with -DGAPING_SECURITY_HOLE):

nc -l -p 80 -e /bin/sh

And then just telnet or netcat to that port and you get yourself a shell.

Re:Cool stuff you can do with netcat by silentbicycle on Friday November 05, 2010 @12:52PM (#1873891)
1. Schlepping files between computers.

computer A:

    nc -l $ARBITRARY_PORT | tar vzxf -
computer B:

    tar vzcf - files_or_directories | nc computer_a $ARBITRARY_PORT
2. Testing socket servers:

    cat canned_request | nc server 80
There are probably other things, but I don't think, "Oh, this is a good use for netcat", I just do it. It's almost as handy as awk.
Re:Cool stuff you can do with netcat by wazoox on Saturday November 06, 2010 @06:17AM (#1876590)
> Schlepping files between computers.

What about using rsync instead ?

Re:Cool stuff you can do with netcat by silentbicycle on Saturday November 06, 2010 @05:32PM (#1877811)
nc is simple and I know its syntax. rsync is more powerful, but I need to look up its options half the time.
Re:Cool stuff you can do with netcat by wazoox on Sunday November 07, 2010 @04:01AM (#1879045)
"rsync source host:destination" just works, no need for options :)
Re:Cool stuff you can do with netcat by dolinsky on Friday November 05, 2010 @02:17PM (#1874216)
I use it to poll our memcached servers w/o first jumping into telnet.

echo "STATS" | nc localhost 11211

STATS can be replaced w/ other memcached-accepted arguments

Re:Cool stuff you can do with netcat by LiveTheDream on Friday November 05, 2010 @12:25PM (#1873766)
Shutting down redis (from default init.d script):

    echo -n "Sending SHUTDOWN\r\n" | nc localhost $REDISPORT &