News for hackers. Stuff that matters.
Re:Storing data on videotape (1975) by Kadin on Thursday November 15, 2018 @10:19AM (#18459884)
Interesting; I'd not heard of NICAM, but there were several other audio formats that used video tape as a storage mechanism.

The Sony PCM-F1 recorder was probably the most common, and could be attached to either a VHS or a Betamax recorder.

My personal favorite, and one that I still own, was the dbx 700 (https://en.wikipedia.org/wiki/Dbx_Model_700_Digital_Audio_Pr...) which used delta-sigma rather than PCM encoding, and produced an NTSC output suitable for tape. (For reasons I don't really understand, 3/4" U-Matic was the dominant recording format, at least that I saw. But it works fine onto a good VHS deck.) The digital format was ahead of its time, although it was a bit of a dead-end technologically unless you count SACD (arguably also a dead-end).

Compared to the F1 it was a joy to use, because you didn't have to leave the headroom of a PCM recorder (it doesn't "brickwall" if you run a hot signal into it). In the days when most audio engineers were used to analog tape and recording very hot, this led to much better-sounding recordings.

You could also take the video signal and send it around a video distribution system (closed-circuit TV, cable, satellite, etc.) and have a very high quality audio feed on a point-to-point link.

Occasionally the boxes turn up on the used market... I still have one, and largely just keep it in the signal loop because of all the neat 1980s blinkenlights and digital VU meters.

There are no comments on this comment yet.