Re:Build a do-it-yourself home air purifier for about $25
by adventured on Tuesday November 13, 2018 @07:45PM
(#18446334)
I did the same thing with my furnace. Just to try it I switched to a high merv filter rating and could immediately notice the considerable reduction in air flow that it was causing (and presumably increased strain on the furnace). Seeing as it was a bit more restrictive than I expected, I ended up ditching that and going back to a weaker merv rating filter (haven't gone back to the blue fiberglass style filters, just going with a weaker merv seems to do the trick, haven't had any problems with increased wear on the furnace in the last ~8 years).
Re:Build a do-it-yourself home air purifier for about $25
by johnbrodie on Tuesday November 13, 2018 @06:54PM
(#18446023)
We upgraded to a "media filter" when we got new HVAC at my house. IIRC they are 4 inches thick, which gives a lot more surface area due to the deep pleats. You can then run fairly tight filters without putting undue strain on the motor - plus they last quite a bit longer. It made a moderate difference in our house in regards to dust in the air, but we also have 3 pets and live in a very dry, dusty area.
Re:Build a do-it-yourself home air purifier for about $25
by olivierlacan on Wednesday November 14, 2018 @03:16AM
(#18448366)
I'd peruse this research on High-MERV Filters and their impact on airflow and pressure instead of taking one HVAC technician's word for it: http://www.homeenergy.org/show/article/nav/issues/page/4/id/...
This graph of airflow vs. MERV rating isn't very conclusive in my mind: http://www.homeenergy.org/UserFiles/file/26-6_p34big(1).jpg
Granted there are about a million variables in all HVAC systems that could affect the results.
I used to put the high-efficiency filters on my furnace, my HVAC guy said these filters are so heavy that they put a strain on the blower motor. It's better for the motor to use a plain blue fiberglass filter (MSRP $1). You're not really filtering that much out of a closed house, unless you run your forced-air A/C or Heat with the windows open.