Software demo: http://www.youtube.com/watch?v=4qnL7479fbU
Source: http://github.com/hugs/pinmachine
Hardware demo: http://www.youtube.com/watch?v=AUgbu0cE2-Q
Biggest issues are cost and size. I'm currently at "1977 Apple" stage - a big, expensive, hand-made prototype. But the biggest issue is cost per pin. Also, resolution is an issue... I'm going for "big and expensive" first, then will work on making it small and cheap overtime. I'm working with small dc motors first, but there are plenty of electromechanical tricks to get this down to braille-worthy stuff.
I haven't sought a collaboration yet, because "pinmachine" is my weekend project -- my time is otherwise filled up working on my startup (saucelabs.com).
I know there's a ton of blind people out there... do most of them know or rely upon braille, and would be interested in such a product?
But if you rethought the problem and built a sort of generic pixel-field display, only with each pixel being a pin, and a consistent way of activating them (perhaps something like e-ink), you could manufacture arbitrarily large screens with sub-linear cost.
"When glass touch screens feel like sandpaper" : http://www.cnn.com/2010/TECH/innovation/10/08/tesla.touch.di...
How about a single "cell" that is on an X-Y mount (or just X for a simpler single line display). Your finger "sees" only one cell at a time anyway. As you used your finger to "skate" over the surface of the board, the "display" computer would read the X-Y position and drive the pins appropriately for that spot.
Back to a one-dimensional (X only) readout with something like a scroll wheel on one side to scroll up and down seems pretty easy and useful. Picture a dot matrix printer where your finger is the "paper". The printhead would need a 2D set of pins, not just a vertical line... hmmm, maybe a vertical line of pins would be adequate in conjunction with the left-right sliding motion.
Result: size is limited by the X-Y mechanical accuracy (backlash, rigidity) and cost would scale very well compared to size: one cell's worth of pin drivers for any reasonable size readout.
[edit] Per Someone http://news.ycombinator.com/item?id=1842617, a X-only (line) readout with two heads, one for each hand (probably on the same platen) would mimic the Braille best. If you had a force sensor to sense the user pushing +/- in the "Y" dimension, you could use that to "scroll" the line without having to take your hands off the readout.
Perhaps a capacitive touch screen with certain subtle audio and haptic feedback?
It seems like the mechanical approach current Braille devices use might've jumped the shark, and I wonder if the blind world doesn't need a system that's more easy to do in today's world.
Fills-screen is a bit of a holy grail. What prevents it from happening is technology and price. The only reliable technology uses space next to each character for a piezzo-electric actuator. That makes it impossible to make displays that stretch far in two dimensions (that two line display was over an inch high)
Also, those actuators are fairly expensive, say $40 per character. production volume is low, so any manufacturer will need 100% or so of margin. Result: 40 characters for a couple of grand.
AFAIk, any other technology still suffers from reliability problems. It turns out to be quite hard to make a small reliable actuator with the required force, travel, and resilience to dirt.
10 lines is 2400.
80 x 25 is 12,000.
WTF? Why has nobody invented a full-screen braille display? Is there some reason it's massively more complicated than it seems?