News for hackers. Stuff that matters.
Re:A faster, cheaper path to fusion energy by 08-15 on Tuesday November 06, 2018 @05:51AM (#18389877)
Why do you think it needs to be enriched?
Re:A faster, cheaper path to fusion energy by philipkglass on Tuesday November 06, 2018 @01:04PM (#18393351)
The ARC paper proposes that the lithium in the salt should be enriched to 90% lithium 6 to reach a tritium breeding ratio of 1.1. See section 5.3, "Tritium breeding."

https://arxiv.org/pdf/1409.3540.pdf

I presume that the breeding ratio would fall below 1.0 with natural lithium.

Re:A faster, cheaper path to fusion energy by 08-15 on Tuesday November 06, 2018 @04:51PM (#18395197)
For the first proof-of-concept reactor? That's borrowing trouble. If the things works at all and the only remaining problem is the tritium supply, funding won't be a problem anymore.
Re:A faster, cheaper path to fusion energy by baking on Wednesday November 07, 2018 @12:50AM (#18397344)
To clarify, the design that the paper is addressing is the ARC, a full-size pilot reactor intended to put 200MW out on the grid for 9 working years.

The demonstration reactor is the SPARC which is based on a scaled down half-sized (but 1/8 the mass and 1/8 the cost) version of ARC. While the main goal of SPARC is to achieve significant net power output, along with a proof-of-concept for many of the design features of ARC, some features may have to be left out for lack of space.

So I don't know if SPARC will be able to achieve net tritium breeding, but I presume they will be testing as many of the features as they can along with taking measurements and verifying the model. It is also noteworthy that the ARC/SPARC design allows for replacement of the vacuum vessel and cooling blanket without complete removal of the outside magnetic coils, so they foresee design iteration of those components unlike the ITER design which will be pretty much locked in.

Re:A faster, cheaper path to fusion energy by baking on Wednesday November 07, 2018 @02:02PM (#18401311)
For example, the blanket needs to be about a meter thick to capture the neutron so a smaller scale design will be inherently less efficient at breeding tritium.
Re:A faster, cheaper path to fusion energy by pfdietz on Tuesday November 06, 2018 @05:27PM (#18395481)
They have to breed tritium if they are to run the reactor for any significant length of time. Buying tritium externally would be very expensive -- it's $100M/kg and up, particularly if you exhaust sources like incidental production in commercial heavy water reactors.

DT fusion has the nasty circular dependency that breeding blankets are needed to make tritium, but they cannot be tested without working high intensity DT fusion neutron sources.