News for hackers. Stuff that matters.
Re:First private Chinese attempt to send rocket into space f... by WalterBright on Sunday October 28, 2018 @04:39AM (#18319702)
Not only should it be impossible to install the part without doing some machine work, it should be easily inspect-able to see if it is right. Hence the arrows and color coding.

For aerospace hydraulic actuators, where installing the lines backwards will crash the airplane (and this has happened):

1. inlet and outlet have different size ports

2. one is a left hand thread, the other right hand

3. the lines are not long enough to reach the wrong port

4. they're color coded, with arrows

5. the acceptance test tests that the actuator goes the right direction. In fact, this is often part of the preflight checklist.

Just for fun, take a look at the connections on your car's battery. It's usually easy to hook them up backwards - the cables are not color-coded, they're long enough, they use the same connectors, the + and - is easily obscured by dirt, etc. Hooking them up backwards will set your car on fire. (google it!)

When I hook up cables, I always find the one that connects to the engine block, that way I know it is -, and scrape off the dirt to make sure I find the - post.

Re:First private Chinese attempt to send rocket into space f... by greglindahl on Sunday October 28, 2018 @04:44AM (#18319714)
Same article:

> By July 9, it is transpired that investigators sifting through the wreckage of the doomed rocket had found critical angular velocity sensors, DUS, installed upside down. Each of those sensors had an arrow that was suppose to point toward the top of the vehicle, however multiple sensors on the failed rocket were pointing downward instead.

Re:First private Chinese attempt to send rocket into space f... by WalterBright on Sunday October 28, 2018 @04:49AM (#18319734)
This is why the guy who inspects and signs off on the work must not be the same guy who does the work.

Yes, the article confirms what I am talking about.

Re:First private Chinese attempt to send rocket into space f... by ridgeguy on Sunday October 28, 2018 @12:57PM (#18321525)
Backwards installation of G-switches crashed the Genesis probe on its return to earth [1].

[1] https://en.wikipedia.org/wiki/Genesis_(spacecraft)#Mishap_In...

Re:First private Chinese attempt to send rocket into space f... by hinkley on Sunday October 28, 2018 @08:47PM (#18324159)
This part was news to me:

> On January 6, 2006, Ryschkewitsch revealed that a pre-test procedure on the craft was skipped by Lockheed Martin, and he noted that the test could have easily detected the problem.

Re:First private Chinese attempt to send rocket into space f... by WalterBright on Sunday October 28, 2018 @04:53PM (#18323117)
From the photo of the switch, I'd say the package design could use improvement. The orientation of it is not obvious.
Re:First private Chinese attempt to send rocket into space f... by ridgeguy on Sunday October 28, 2018 @06:21PM (#18323596)
Just so.

Twenty minutes of a designer role-playing an assembly tech installing those components (with the mindset of trying to fail) might have gotten us a "this can only fit one way" result.

Re:First private Chinese attempt to send rocket into space f... by grepthisab on Sunday October 28, 2018 @07:05AM (#18320123)
Oh geez I did this one time on my first car when I was 16 or so. Transposed the battery connects. It sparked and was just done for a second, but fried the whole ECU, battery, alternator, and more. Very costly lesson I will never repeat.
Re:First private Chinese attempt to send rocket into space f... by justtopost on Sunday October 28, 2018 @01:01PM (#18321553)
Sounds like the real failure was your main fuse, or lack therof. That should blow before all that other stuff. Safeguards are THE lesson.