Re:Intel Tock-Ticks Chipsets Back to 22nm
by monocasa on Friday September 28, 2018 @09:29PM
(#18098223)
Not for the time frame generally seen until nowish which is a new process every 18 months. If you wait to smooth out your process you'll be left in the dust.
Also, easier on the RTL isn't really easier on the process. The digital guys and the process guys have very different constraints, so there's probably not even a benefit to having "simpler" chips on a newer process first.
Re:Intel Tock-Ticks Chipsets Back to 22nm
by rbanffy on Monday October 01, 2018 @07:35AM
(#18111684)
Simpler chips also means smaller dies, which, for a new process also means better yield even at a higher defect rate. Not only chipsets could benefit from it, but also smaller processors such as the Atom lineup.
I assume a 10nm Quark X would be hard to see with the naked eye ;-)
Re:Intel Tock-Ticks Chipsets Back to 22nm
by monocasa on Monday October 01, 2018 @03:28PM
(#18115961)
But the margins are already much lower on the smaller dies.
Already something like a quark is next to free on the process level; the recurring cost is nearly all packaging and testing.
Additionally there's some practical limits to how small you can make a chip since you still need the analog side of the io pins and their bond pads, and you can't shrink those very much.
You can design around unreliable processes by increasing redundancy and these simpler chips seem excellent as technology validation.