Re:Electric Vehicles’ Day Will Come, and It Might Come Suddenly
by WillPostForFood on Sunday September 02, 2018 @01:37AM
(#17895749)
This would be awesome - someone Kickstart it or something.
Re:Electric Vehicles’ Day Will Come, and It Might Come Suddenly
by p1mrx on Sunday September 02, 2018 @04:15AM
(#17896142)
ClipperCreek sells EV chargers with a UART interface to set the charging rate (in 25% increments), so it should be relatively straightforward to stuff a Raspberry Pi or something in there.
But that option costs an extra $184, and the UART protocol is only available under NDA, which probably makes it difficult to open source.
Re:Electric Vehicles’ Day Will Come, and It Might Come Suddenly
by sokoloff on Sunday September 02, 2018 @07:56AM
(#17896675)
The J1772 spec is well documented and supports the "advertisement" of maximum charging current. You could add the capability to something like OpenEVSE. https://www.openevse.com/
Re:Electric Vehicles’ Day Will Come, and It Might Come Suddenly
by p1mrx on Sunday September 02, 2018 @01:58PM
(#17897876)
At the moment, I'm pretty sure I have enough panel capacity for a plain old EVSE, but if I do need something controllable, then OpenEVSE looks really interesting. Thanks.
Here's an example of OpenEVSE tracking solar capacity, which is basically equivalent to panel load management:
https://github.com/OpenEVSE/ESP8266_WiFi_v2.x#solar-pv-diver...
This wouldn't require any Internet access, just data sent over the power line, to a charger that's able to listen.
Existing home wiring could also be repurposed to carry HVDC, and therefore more power (12A * 600V = 7.2kW)... but I'm not sure if HVDC cars are designed with low current in mind.