Environmentally-focused / permaculture types tend to like concrete floor + strawbale. It solves a lot of heating / cooling problems, but naturally the benefits there depend on the climate you're in and local costs of materials.
Anyway, to your point. Strawbale housing comes in two broad forms -- infill or load-bearing. Infill was the most popular way of doing this a few years ago, but seems to have lost favour (I don't know why). Load-bearing is definitely more difficult to modify, and that may be the variety you've got experience with. Infill is where you build a (say) structural metal pre-fab shed on a slab, and then tie down bales to embedded threaded bar in the floors to make the walls - filling gaps at the top with looser material. Non-trivial to change your mind later, but at least can be done without affecting the roof / infrastructure.
I'm likely to use in-fill, as load-bearing just seems too much effort, too time-constrained in terms of dealing with random weather events, and too difficult to effect subsequent design changes.
I'm assuming the gunite mixture allows some breathing? I thought concrete mixes were typically avoided for this reason -- most people I've heard of that do these (I'm in AU) use a natural mix, mostly clay-based, IIRC.
It is still one of the most rewarding experiences of my life, though it was tough at the time.
There is a lot we didn’t get right the first time, and had to fix in subsequent years. Nothing that affected livability.
To that point. Concrete is difficult to re-work. It’s not very sustainable either, if that is a concern of yours.
Our house is made of straw bales. (It’s a thing). We visited a bunch before building. But straw bale houses are a lot like concrete houses. Once built difficult to re-work. Great for insulation. Horrible to re-work. I would not suggest concrete, from that perspective.
Anything that can cause you legal trouble or that would be expensive to re-work, pay a professional. Otherwise, have fun. Do it. You’ll be glad you did.