News for hackers. Stuff that matters.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @07:27AM (#17817889)
The story of the Merlin V12 is really the story of E.J. Houdry, a Frenchman who came to the US in 1930 and, with plenty of help at Standard oil, perfected fluid catalytic cracking of hydrocarbons.

FCC gave the US AVgas with octane as high as 150 by the end of the war. This allowed much higher engine manifold pressures than the Germans before detonation, who had mostly 87 octane fuel throughout the war. Engine power is roughly proportional to manifold pressure.

Source: a long rabbit trail of trying to understand why the Daimler Benz DB 605, while seemingly far more advanced on paper, was never better than parity with the smaller Merlin during WW2. Houdry being in occupied France at the wars' start would make an interesting alternate history.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by raverbashing on Wednesday August 22, 2018 @07:59AM (#17818039)
And before anyone asks, FCC stands for Fluid catalytic cracking
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by jabl on Wednesday August 22, 2018 @11:03AM (#17819169)
I've understood that a large reason why the Allied fuel had higher octane was use of TEL, and that for some reason(???) the Germans never figured it out (sounds unlikely?) or they couldn't produce it due to some other reason. Is this completely wrong, did the Germans also use TEL?
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @11:25AM (#17819331)
My knowledge about the role of tetraethyl lead in AVgas is limited to basically Wikipedia. But overall octane driver for both sides was feedstock quality (oil or paraffins).

The Wikipedia primary source that shows the Germans also had TEL production is given as this book:

https://books.google.com/books?id=FDNyGpCS9WsC&pg=PA470&lpg=...

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Friday August 24, 2018 @10:25AM (#17835084)
Courtesy follow-up after some more digging. If you Google for "Technical Report 145-45" you'll find a PDF with the US report on German fuels that clearly indicates their use of TEL, and at what concentration.

The other major take away from that is the lean/rich Octane equivalents of the C-3 fuel were like 90/130 by wars end. So pretty good rich performance, but laggard lean, which would of course impact engine consumption rates in the larger DB 605.

The allies had widely available 100/130, and some 130/150 AVgas in the Pacific best as I have been able to find.

It comes back to the limited quality of hydroforming then mixed with synthetics for the Germans, vs FCC for allies. US crude wasn't of great starting quality, but they were better able to refine it at scale.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by jabl on Sunday August 26, 2018 @12:08PM (#17846474)
Thanks for the update.

I believe the US late war high octane avgas was 115/145. 100/130 was indeed widely available more or less the entire war.

I think the British had something they called "150 octane", but I'm not sure that really was "better" or even different than the US 115/145, or was it different testing protocols etc.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Monday August 27, 2018 @08:52AM (#17851133)
Interesting, especially the 115/145. The octane equivalent #s from that era seem to be all over the map.

If actually 115/145, that's a big delta in performance for lean operation, and certainly helps the narrative. Do you have a primary source? I'd like to read further.

Regardless, what's certain is the Germans were in the high 40s mmHg for manifold pressure in late variant DB 605, vs the Allies were in the 60s mmHg for Merlins.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by maxerickson on Wednesday August 22, 2018 @11:21AM (#17819297)
This article doesn't make citations but seems credible:

http://gasolinefuels.blogspot.com/2011/06/world-war-ii-and-o...

It sounds like there is a volume story there, with the US supply situation being much better.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by Declanomous on Wednesday August 22, 2018 @11:37AM (#17819438)
The US won WWII through superior logistics as much as anything else. The Japanese strike at Pearl Harbor was in recognition of the fact that they would lose any prolonged war with the US because of the manufacturing capacity that we possessed.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by dsfyu404ed on Wednesday August 22, 2018 @10:10AM (#17818765)
Don't forget alcohol injection. Without water/alcohol added to reduce intake temperatures the high manifold pressures would have never been possible.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by Tuna-Fish on Wednesday August 22, 2018 @10:15AM (#17818809)
The germans had that too. The difference in engine power between the sides was mostly about the quality of the fuel.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phillc73 on Wednesday August 22, 2018 @10:33AM (#17818936)
The German MW 50[1] used a mixture of methanol and water. It could be fitted to the BMW801 (Focke-Wulf Fw 190) and the DB 605 (Messerschmitt Bf109) engines.

There was also the GM-1[2] which was a nitrous oxide injector and mostly used for high altitude work.

[1] https://en.wikipedia.org/wiki/MW_50

[2] https://en.wikipedia.org/wiki/GM-1

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @10:34AM (#17818949)
Water methanol injection was invented by Sir Harry Ricardo, a British engineer.

It is my understanding that his book "The High Speed Internal Combustion Engine" was the definitive text on the topic of internal combustion engines in the 1930s and 40s.

Google finds a reprint for a reasonable price here: https://estore.ricardo.com/shop/the-high-speed-internal-comb...

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by sdfx on Wednesday August 22, 2018 @08:59AM (#17818371)
Can you point me to any books on this subject? Sounds like a fascinating story to dive into in more detail.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @09:50AM (#17818639)
"zeolite" materials as catalysts are something you are exposed if you study materials science (my formal education). Also W.K. Lewis is a name you'll be exposed to if you dip a toe into chemical engineering. Zeolites and Lewis are central in the FCC story.

A little Googling produces their patent on this: https://patents.google.com/patent/US2451804A/en?oq=2%2c451%2...

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @09:54AM (#17818668)
A little more Googling of the ACS website produces a nice PDF historic summary of the Houdry process:

https://www.acs.org/content/dam/acsorg/education/whatischemi...

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @09:41AM (#17818584)
Not specifically about this topic, but "Oil & War: How the Deadly Struggle for Fuel in WWII Meant Victory or Defeat" is the most definitive account of the overall fuel supply factors that I am aware of.
Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by Steve44 on Wednesday August 22, 2018 @10:32AM (#17818929)
That book probably covers the operation to get fuel across the Channel for the D Day invasions. I'm fairly sure Brenzett Aeronautical Museum had a section about it along with some pipe and equipment when I went a few years ago.

There were so many astonishing developments in the background to support the front end fighting which are so easily overlooked.

Thanks for the book info, I've flagged that to get at some point.

Re:Packard Merlin: How Detroit Mass-Produced Britain’s Hand-... by phasetransition on Wednesday August 22, 2018 @10:41AM (#17819006)
Many, many, many inventions: -Babbitt bearing alloys with indium -AL7075 -Quartz oscillators -Magnetrons -Vocoding, PCM, and FSK (https://en.wikipedia.org/wiki/SIGSALY)