News for hackers. Stuff that matters.
Re:Arm Announces Client CPU Roadmap For Laptops by RossBencina on Friday August 17, 2018 @03:14PM (#17785060)
I'm not sure what qualifies as a NUC, but there are a few "high-end" ARM SoC boards with PCIe now. Here are a few in the $100-$300 price range:

Rockchip RK3399 boards:

NanoPC-T4, $109 2x A72@2GHz, [email protected] 4GB LPDDR3-1866 RAM, 4 lane PCIe M.2 80mm https://www.friendlyarm.com/index.php?route=product/product&... http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T4

RockPro64, $80 2x [email protected], [email protected] 4GB RAM, 4 lane PCIe full-size slot http://wiki.pine64.org/index.php/ROCKPro64_Main_Page https://www.pine64.org/?product=rockpro64-4gb-single-board-c...

Rock960, ~$99 https://docs.96rocks.com/rock960/start/unbox/frontside/

HiSilicon Kirin boards:

HiKey960, $239 Kirin 960, 4x [email protected] 4x [email protected], 3GB LPDDR4, TSMC 16nm http://hihope.org/product/HiKey960 https://www.96boards.org/documentation/consumer/hikey/hikey9...

HiKey970, $299 Kirin 970, 4x [email protected], 4x [email protected], 6GB LPDDR4X-1866, PCIe M.2 2260?, TSMC 10nm http://hihope.org/product/HiKey970 https://www.96boards.org/product/hikey970/ https://www.youtube.com/watch?v=8YiJ4PQoNTM

There's also the Socinext 24-core developer box. It's $1200 for a complete system: https://www.96boards.org/product/developerbox/

Re:Arm Announces Client CPU Roadmap For Laptops by loser777 on Friday August 17, 2018 @04:38PM (#17785475)
Having dabbled with a few of these boards (RK3399, Hikey960), I can say that the user experience is still quite far off from what you would expect on an x86 NUC running a GNU/Linux distro.

Even finding usable images to flash was tough on the RK3399 and near-impossible on the HiKey960. Even then, the HiKey960 image I found was pretty unstable (randomly killed processes due to a mysterious OOM) and was contributed by a _forum user_, not the official vendor (they seem to mainly support Android).

What should be kept in mind is that these are essentially phones-on-a-board that may or may not have been shoehorned properly to run a desktop Linux. That comes with all of the relevant baggage. For example, the HiKey960 board will aggressively thermal throttle given that all that comes with the board is a piddly copper "heatsink" that you _glue_ on the SoC.

Unfortunately the Raspberry Pi is the only board that I've come across that offers a sane GNU/Linux experience in terms of software support. The performance is acceptable if you consider that even these 4xA73 boards would still get smoked by a reasonable desktop CPU.

Re:Arm Announces Client CPU Roadmap For Laptops by lhl on Friday August 17, 2018 @07:51PM (#17786145)
For random ARM SBCs, I like the reviews that MickMake does: https://www.mickmake.com/category/reviews Unlike most "reviews" online he actually installs Linux, points out all the things that don't work properly, and runs them through Phoronix, checking performance, power usage, and temps.

At the high end, I agree that unless you have something really specific (if you need Jetson for CUDA or high-end imaging), you'd usually be better off w/ x86 - it's nice to have full mainline support and stuff that just works. In the SBC space, for the same price as a HiKey960 you could get an UDOO x86 Advance or an UP Squared, both of which will beat the pants off the HiKey in most aspects.