News for hackers. Stuff that matters.
Re:Getting 4 bytes or a full cache line: same speed or not? by ordu on Wednesday August 01, 2018 @02:29PM (#17665453)
> The code uses inline assembly a lot, i.e. optimizer likely failed to achieve much, and for code like this optimizations are very important.

Yes, optimizations are important, but not for the question the autor tries to ask. To answer his question he need to control optimizations, to have vectorized code and not vectorized one. The simpliest way to control optimizations is to turn them off and to do them by hand.

> Recent CPUs return rdtsc values unrelated to the count of instruction it executed, it’s a counter running at some constant frequency.

So this counter is the best fit to measure speed of code. What the point to count number of instructions executed when different instructions take different time to execute? But if rdtsc counts clock ticks, than it fits best. It is OS independant way to measure time. It is compiler dependant way, but it works with gcc and clang, the compilers you can get for free. Alternatively it is not so hard to rewrite two non-empty __asm statements into any asm syntax your compiler understands. There are total of 6 instructions.

Re:Getting 4 bytes or a full cache line: same speed or not? by Const-me on Wednesday August 01, 2018 @04:32PM (#17666705)
> it works with gcc and clang, the compilers you can get for free

When I’m building for Windows, I usually use Visual C++ 2017 community edition, the compiler I got for free.

> into any asm syntax your compiler understands

When building 64 bit binaries, my compiler doesn’t understand any syntax. The portable way to produce that instruction is __rdtsc() intrinsic, it’s supported in all major compilers just in different headers, x86intrin.h for gcc/clang, intrin.h for msvc.

> There are total of 6 instructions.

Right, but I’m not sure assembly, inline or not, has good compatibility with advanced optimization techniques implemented by all modern compilers. It’s just too low level: harder to inline, impossible to move stuff across registers…

Re:Getting 4 bytes or a full cache line: same speed or not? by ordu on Thursday August 02, 2018 @12:07AM (#17669174)
> When I’m building for Windows, I usually use Visual C++ 2017 community edition, the compiler I got for free.

Is it an obstacle to get one more free compiler?

> When building 64 bit binaries, my compiler doesn’t understand any syntax.

Is it really? I'm surprised.

> The portable way to produce that instruction is __rdtsc() intrinsic, it’s supported in all major compilers just in different headers, x86intrin.h for gcc/clang, intrin.h for msvc.

I like to learn it. Thank you.

> Right, but I’m not sure assembly, inline or not, has good compatibility with advanced optimization techniques implemented by all modern compilers. It’s just too low level: harder to inline, impossible to move stuff across registers…

Its not relevant: this code do not rely on compiler optimizations.

Re:Getting 4 bytes or a full cache line: same speed or not? by Const-me on Thursday August 02, 2018 @12:28AM (#17669240)
> Is it an obstacle to get one more free compiler?

I have both gcc and clang installed but they’re for Linux. I’m using Windows as my main OS, and prefer running native binaries, e.g. because tools for debugging & profiling.

> Its not relevant: this code do not rely on compiler optimizations.

Right, and that’s GCC’s problems — MSVC-produced code is optimized, and is free from the described issue.

You know how I found that? I’ve made a version portable across compilers, built with VC++ and run on Windows: https://github.com/Const-me/MemoryAccessCosts I don’t have Intel compiler but my expectation is it’ll work even better.

Re:Getting 4 bytes or a full cache line: same speed or not? by ordu on Thursday August 02, 2018 @02:22AM (#17669583)
> Right, and that’s GCC’s problems — MSVC-produced code is optimized, and is free from the described issue.

> You know how I found that? I’ve made a version portable across compilers, built with VC++ and run on Windows: https://github.com/Const-me/MemoryAccessCosts I don’t have Intel compiler but my expectation is it’ll work even better.

Yes! You have found that optimization doesn't allow you to make a comparison. Code is free of the described issue, so you cannot measure effect this issue have on the speed. As I understand from asm listings, you are comparing now not 1 iteration with 16 iteration, but 1 iteration with some vectorized code. In the original article this case is covered, with hand-crafted vectorized code.

Do you see? When optimization is turned on you cannot compare 16 iterations with 1 iteration or with vectorized code. It is the basics of experimental method: you need to control independant variable, and to measure dependant one. When using compiler optimizations it is the way harder, you would need to check generated code.

Turn off vectorization of code in msvc, and hopefully you'll get the same results.

Re:Getting 4 bytes or a full cache line: same speed or not? by Const-me on Thursday August 02, 2018 @12:30PM (#17672793)
> you are comparing now not 1 iteration with 16 iteration

GCC made code with zero iterations, it unrolled the complete inner loop and produced 16 scalar add instructions.

MSVC made code with two iterations, each iteration containing two paddd SSE2 instructions, which stand for _mm_add_epi32.

> Turn off vectorization of code in msvc

I can’t. When I try, the compiler says “Command line warning D9002: ignoring unknown option '/arch:IA32'”

SSE2 is a requirement for AMD64 CPUs, that’s why the MS compiler doesn’t support scalar code anymore. And the data size is too large for 32 bit builds, it’s not enough address space for a 8GB vector.

Re:Getting 4 bytes or a full cache line: same speed or not? by ordu on Thursday August 02, 2018 @12:50PM (#17672999)
> GCC made code with zero iterations, it unrolled the complete inner loop and produced 16 scalar add instructions.

It doesn't matter really. It is amount of work that needed for experiment.

> I can’t. When I try, the compiler says “Command line warning D9002: ignoring unknown option '/arch:IA32'”

I have zero experience with msvc, but I believe you are doing it wrong. You need not to change arch, you need to control over optimizations. For example, gcc has options -ftree-vectorize, -ftree-loop-vectorize, and -fno-tree-vectorize and so on. You need to find docs on compiler optimization techniques and on options that allow to control them.

> MS compiler doesn’t support scalar code anymore.

Strange, but ok. If we return to the starting question "why the author didn't write the code portably", than we now know the answer. There are no way to write scalar code with MSVC. MSVC doesn't allow make this kind of experiments, so there are no reasons to make such tests portable to msvc.

Re:Getting 4 bytes or a full cache line: same speed or not? by Const-me on Thursday August 02, 2018 @01:48PM (#17673641)
> You need not to change arch

See the pics: http://const.me/tmp/vc/codegen.png http://const.me/tmp/vc/optimize.png

> You need to find docs on compiler optimization techniques

Indeed, #pragma loop(no_vector) in the source code before the inner loop did the trick. The results are very close to GCC.

Re:Getting 4 bytes or a full cache line: same speed or not? by justrobert on Wednesday August 01, 2018 @02:32PM (#17665503)
Often you can turn off frequency scaling so you can have rdtsc still be useful.