Was the internet speed so high that you couldn't use a normal supported router like a TP-Link Archer C7 at half the cost? I need to do more testing but it seems my C7 can handle my 100/100Mbps fiber connection doing SQM without too much issue.
[2] https://gist.github.com/gonzopancho/760ab9ecee9dfbc1b6033e48...
These days I just run OpenWRT on x86, no more will my router sit in a broken state that I can't fix by logging in over the LAN or WAN (via OpenVPN ofc). Wish PFSense would get sane defaults in this regard!
Edit: Maybe you mean Wifi to wired may have a disabled offload? That path does go through the router and not directly through the switch. For bigger installations I end up having one of these with wifi disabled as the router (firewall, dhcp, etc) and individual ones connected through ethernet as dumb access points (same SSID on all and straight bridge from Wifi to Ethernet). That should also avoid any issues and is a good setup to get more wifi coverage with a simple config.
To answer your question: I have no idea. Would be neat if a much cheaper model had the horsepower though.
I hear hardware offload is possible, but I have yet to try a build that has the patches for it.
I purchased them a Netgear R7800 and installed hnyman's LEDE build [1] to enable SQM. Night and day difference in latency response. No more staring at a white screen for 3 seconds per URL click.
The build has been stable for several months. I wouldn't recommend this for non-technical users or anyone not willing to spend time troubleshooting, but it has been a great improvement. I couldn't find any other device capable of doing this without running x86 hardware or something else silly.
A few other people mention it, but yes, this is only going to work on slower connections on current SOHO hardware. I think the R7800 can do software SQM at up to 150mbps or so. Plus, if you have a gigabit symmetric connection, hopefully you aren't having bufferbloat issues.
Just wish a popular manufacturer would release an easy-to-use router with SQM so I could install it for non-technical users and forget. Ubiquiti is somewhat close to that, but I believe their prosumer hardware (USG) is running a slow processor at the moment and doesn't even support SQM without installing custom kernels.
[1] https://forum.lede-project.org/t/build-for-netgear-r7800/316