Re:The rise and fall of Sugru
by adrianN on Tuesday June 12, 2018 @09:22AM
(#17292944)
I repaired a tablet case with Sugru and replaced the worn feet at the bottom of my Macbook with it. I also reinforced several cables with Sugru to prevent breaks. Overall I'm pretty happy with the product, but I don't have many problems where Sugru is useful. It's too expensive to make bigger things out of it and small repairs just don't happen too often.
[ Parent
| on HN ]
My biggest complaint about it is that it expires! I bought a 5 pack because I had an immediate use and it worked amazingly well.
6 months later I again had a need for it and I went to grab one of the 4 remaining packs and they were all dried out and hard. I flipped them over and there was an expiration date that had passed!
This is the type of product I want to keep on the shelf for when I need it, not something I want to purchase on demand. Also it's expensive.
I use this stuff from 3M that is absolutely vile-smelling but delivers the same results as Sugur, for about 1/5th the cost. It comes in these little rolls, with an inner core material and an outer material, which somehow manage to co-exist on the shelf without curing, until you remove the end-caps which expose both layers to oxygen, somehow setting off the curing process .. you then smoosh it together, so it becomes this ultra-disgusting smelling blob, then apply it where necessary. Within a few hours, its like, rock-solid. I've fixed countless things with the batch I bought a year ago, and its still good after living in the fridge ...
Re:The rise and fall of Sugru
by wlesieutre on Tuesday June 12, 2018 @09:47AM
(#17293169)
Sounds like epoxy putty. If it cures “rock-solid” it’s not the same results as Sugru, which is a flexible rubber.
Looks like one of the products here?
https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All...
Would you mind sharing the name of the product?
Doing some quick googling revealed this: https://www.amazon.com/J-B-Weld-8276-KwikWeld-Reinforced/dp/...
Apparently two part epoxy dries really hard. So not quite the same application as Sugru.
What's the name of this product?
Didn't realise it expires [sigh]. The rest of my packets are probably useless then.
That said, I happily repaired a macbook charger at both ends, so the 10 or so quid I spent on it works out far cheaper than a £60 charger.
Re:The rise and fall of Sugru
by daveFNbuck on Tuesday June 12, 2018 @09:51AM
(#17293210)
I actually have a bunch of unopened sugru and recently needed to repair my macbook charger. I ended up using electrical tape because the sugru packets are huge and I couldn't think of anything to do with the rest of it after repairing the charger. I guess that didn't matter so much if it's expiring anyway, but I also didn't want to leave it for 24 hours to cure.
They last a lot longer if you keep them in your refrigerator.
Re:The rise and fall of Sugru
by JetSetWilly on Tuesday June 12, 2018 @11:42AM
(#17294340)
I fixed my washing machine with it. There was a tear in the rubber round the door causing it to leak. Put some sugru on, carefully flush with the door lining, it is still there a year later. Saved quite an expensive repair.
Re:The rise and fall of Sugru
by jonhendry18 on Tuesday June 12, 2018 @02:15PM
(#17296162)
FYI: Sugru doesn't stick to plastic wrap/cling film. So if you want to get some sugru to mold to a surface without sticking, just wrap it in plastic. When the sugru has cured, remove the plastic.
Re:The rise and fall of Sugru
by jonhendry18 on Tuesday June 12, 2018 @02:10PM
(#17296109)
I recently used 2 packets of sugru to adapt my Hoverbar gooseneck iPad stand to fit my iPad Air. (The company used to sell adapters for newer iPads but I waited too long and my Air is too old now.)
Worked great. The sugru is about two years old, having been stored in the fridge all along.