News for hackers. Stuff that matters.
Re:A vacuum tube ROM? by CamperBob2 on Monday June 04, 2018 @03:36AM (#17225411)
1000V, at the current levels needed for this application, amounts to the juice behind a good carpet shock.
Re:A vacuum tube ROM? by kragen on Monday June 04, 2018 @04:37AM (#17225704)
Dunno about the Monoscope in particular, but a lot of tubes need several milliamps, which is quite a bit more painful than a good carpet shock. Not fatal, but not something I'm eager to experience. And I'm the guy who used a one-henry inductor to administer electric shocks to people in high school — including, repeatedly, myself.

The issue is that it's a lot easier to build or buy a kilovolt power supply that doesn't have adequate current limiting than one that does. And even one that has it in theory may not have it in practice — that big capacitor across the output? Make sure it isn't just wired directly to the output terminals, because its ESR sure as hell isn't going to be adequate current limiting.

So I think it's reasonable to be wary of kilovolt circuits. Dying is easy, but you only get to try it once.

Re:A vacuum tube ROM? by kragen on Tuesday June 12, 2018 @01:16PM (#17295441)
Lightedman's dead comment, in response to my, "The issue is that it's a lot easier to build or buy a kilovolt power supply that doesn't have adequate current limiting than one that does," said, "You can buy Van de Graaf generators all day long. Quarter-million volts minimum for $200."

While van de Graaff generators are indeed relatively affordable, and indeed some even cost less than US$200, a working microwave oven costs US$60, and a broken one can be had for under US$10. Furthermore, a safe van de Graaff generator is not actually capable of supplying enough current at the high voltage to operate a vacuum tube, while a deadly microwave-oven transformer is; and there are orders of magnitude more microwave ovens available.

Re:A vacuum tube ROM? by jacquesm on Monday June 04, 2018 @07:15AM (#17226669)
A KV from a half decent supply will throw you across the room in a bad case and give you a nasty burn in a slightly better one. Don't underestimate the power of a HV supply, especially one that has some nice stabilization and caps.
Re:A vacuum tube ROM? by tubetime on Monday June 04, 2018 @09:31AM (#17227563)
my power supply is capable of 1KV at 10mA. it's the one piece of lab equipment i own that genuinely scares me. all this stuff has to be treated with respect. still though it's good for cool experiments with monoscope tubes. :-)
Re:A vacuum tube ROM? by CamperBob2 on Tuesday June 05, 2018 @12:55AM (#17235097)
In other news, you don't need 100 watts worth of HV to run a CRT.